Using The Aux Input - Denver DAB-10 Manual De Instrucciones

4. Plug the cigarette-lighter power plug into the cigarette lighter of your
car.
5. Install the external antenna as per the below diagram:
How to use:
1. Turn on the #DAB-10 car adaptor.
2. #DAB-10 will perform a Full Scan of DAB stations automatically.
Press TX button on the #DAB-10 and the screen will show the current
3.
FM transmitting frequency, make a note of that number. The default
is 87.5MHz but you can change to other manually so it suits better to
the area you are driving in.
Turn on your in-car audio system.
4.
Switch the car radio's FM frequency to match to #DAB-10 FM
5.
transmitting frequency setting.
ENG 3
Long press "MENU/INFO" button, you will see few options:
- Reset , to reset the DAB stations
- Volume, to do the volume control
- Full scan, to start the full scan DAB stations
- Manual, to do the manual tuning of DAB stations

USING THE AUX INPUT

- Connect the AUX connect wire (not included) from the out jack of
your Personal Player such as portable MP3 player to the AUX
input jack.
- Turn on your Personal Player to begin playing, adjust the volume
to desire listening level.
-
USING THE AUX OUTPUT
- Connect the AUX connect wire (not included) from the out jack of
the #DAB-10 car adaptor to the AUX input jack of your car.
- The audio signal of the car DAB adaptor will be transferred to
your car speakers.
ENG 4