Elta 6698RB Manual De Instrucciones página 19

Skip Mode
In playback mode press SKIP-, SKIP+, -10 or +10 to skip to the previous or next file or 10 files forward or
back.
1. Select the file in playback, stop or pause modes with SKIP-, SKIP+, -10 or +10 and start playback by
pressing PLAY/PAUSE.
2. Press SKIP+ repeatedly to skip to the next file(s), until the desired file number is displayed. Press SKIP+
during playback of the last file to skip to the first file of the USB device.
3. Press SKIP- repeatedly to skip to the previous file(s). Press SKIP- during playback of the first file to skip to
the last file of the USB device.
4. Briefly press +10 to skip ten files forward. If less than 10 files are left on the USB device you skip to the
last file. Press +10 during playback of the last file to skip to the first file of the USB device.
5. Briefly press -10 to skip ten files back. If you are within the first 10 files of the USB device you skip to the
first file. Press -10 during playback of the first file to skip to the last file of the USB device.
Fast Forward and Rewind
In USB playback, no fast-forward or rewind function is available.
Program Playback
Up to 20 files can be programmed in your desired sequence; any file can be programmed more than once.
1. Before programming, please press STOP and PROGRAM. The display shows besides CD also 000 and
PROG.
2. Select the desired file with SKIP+, SKIP-, +10 or -10.
3. Save the file with PROGRAM. The display shows PROG and P01. Now select the next file.
4. Repeat steps 2 and 3 to save further files, the maximum number of files is 20.
5. Press PLAY/PAUSE to start playback of the files in your desired sequence. In program mode the file
number and PROG are displayed.
6. In program mode the repeat function for the complete program is available, see details unter Repeat
Modes point 4.
Delete Program
Follow these steps to delete the program:
1. Open the CD compartment.
2. Set the function selector to RADIO or OFF positions.
3. Press STOP.
Repeat Modes
Several repeat modes are available on the unit; press REPEAT to access and select.
1. Press REPEAT once to repeat the current file. The display shows REP 1 besides the file number.
2. Press REPEAT twice to repeat the all files on the USB device. The display shows ALL REP besides the file
number.
3. Press REPEAT again to return to normal playback mode. The display shows again the file number.
4. You may also use the repeat function during program playback. In program mode press REPEAT once to
repeat the complete program. The display shows besides the file number and PROG also ALL REP.
19.