Igo power splitter Guia De Inicio Rapido página 2

Install
Important Notices
Please read the following carefully
before using the iGo power splitter.
When using iGo power splitter to charge
two devices, the maximum power output
of your iGo charger is shared between
both devices. Most individual devices and
combinations of devices should charge.
However, if a device attached to the iGo
power splitter is not charging or is displaying
an abnormal charging indication,
it may need more power than can be
delivered with that device combination. If
this occurs, try one or more of the
following:
1. Turn off your device(s).
2. Detach one of the devices.
3. If the problem persists, remove the
splitter and connect your device and
the appropriate tip directly into your
iGo charger.
Note: The iGo power splitter may not
support devices that have completely
dead batteries. These types of devices
may need to charge alone before
attempting to share power or may
need to charge in the "off" state
while sharing power.
2
(iGo chargers
sold
separately)
(tips sold
separately)