Publicidad
Step 2
1st-Hold your unit level against the wall in its fi nal location. Strike a mark through the holes onto the wall.
å
2nd-Place your unit onto the fl oor and drill a 5/16" hole on each mark.
å
3rd-While you squeeze the wings together, gently tap four WALL ANCHORS (2) into the holes until they are even with
å
the surface of the wall.
With the help of another person, hold your unit against the wall over the ANCHORS (2).
å
Turn four 2-3/4" PAN HEAD SCREWS (5) through the holes in the BACK(A) and into the WALL ANCHORS (2).
å
NOTE: You will need to turn the 2-3/4" PAN HEAD SCREWS (5) multiple turns to completely tighten and secure your unit
å
to the wall.
Mark and drill a
5/16" hole into
the wall.
www.litterbox.com/support
Mark and drill a
2
5/16" hole into
the wall.
2-3/4" PAN HEAD SCREW
(4 used in this step)
2
nd
rd
3
A
5
427331
Option #1
Steps 1-3
1
st
Page 5
Publicidad
