Publicidad
12
www.raider.bg
EN
Congratulations on the purchase of machinery from the fastest growing brand of electric and pneumatic
tools - RAIDER. When properly installed and operating, RAIDER are safe and reliable machines and work
with them will deliver a real pleasure. For your convenience has been built and excellent service network
of 45 service station across the country.
Before using this machine, please carefully acquainted with these "instructions for use.
In the interest of your safety and to ensure proper use and read these instructions carefully, including
the recommendations and warnings in them. To avoid unnecessary errors and accidents, it is important
that these instructions will remain available for future reference to all who will use the machine. If you sell
it to a new owner "Instructions for Use" must be submitted along with it to enable new users to become
familiar with relevant safety and operating instructions.
Euromaster Import Export Ltd. is an authorized representative of the manufacturer and owner of the
trademark RAIDER.
Adress: Sofia City 1231, Bulgaria "Lomsko shausse" Blvd. 246, tel 02 934 33 33, 934 10 10, www.
raider.bg; www.euromasterbg.com; e-mail: info@euromasterbg.com.
Since 2006 the company introduced the system of quality management ISO 9001:2008 with scope
of certification: Trade, import, export and servicing of hobby and professional electrical, mechanical and
pneumatic tools and general hardware. The certificate was issued by Moody International Certification
Ltd, England.
Parameter
Type of model
Rated voltage
No-load speed
Chuck size
Torque control range
Мanual gearbox
Max. Toruqe force
1. General guidelines for safe operation.
Read all instructions carefully. Failure of the nature following instructions can cause electric shock, fire
and / or severe injuries. Keep these instructions in a safe place.
1.1. Safety in the workplace.
1.1.1. Keep your workplace clean and well lit. Disarray and poor lighting may contribute to the
occurrence of an accident.
1.1.2. Do not operate in an environment where the cordless drill with an increased risk of an explosion
in the vicinity of flammable liquids, gases or powders.
During operation of the cordless drill can be separated sparks that can ignite powders or fumes.
1.1.3. Keep children and bystanders at a safe distance while working with the cordless drill.
If your attention is diverted, you may lose control over the cordless drill.
1.2. Safety when working with electricity.
Protect your cordless drill from rain and moisture.
Penetration of water into the cordless drill increases the risk of electric shock.
Original instructions' manual
Dear Customer,
TECHNICAL DATA
Cordless drill
Units of
measurement
-
RDP-SCD20S
V DC
min
0-350 / 0-1300
-1
mm
-
-
Nm
Value
20
10
20+1
2
44
Publicidad
