Firstwheels City Elite Modo De Empleo página 13

English
the button at the side of the bumper bar; the bar can now be raised and rotated
to allow access to the seat. When refastening the bumper bar, make sure that it
clicks firmly into place.
Folding the City Elite
Taking the stroller apart - Illustration 1 - 5
Remove the seat including the hood from the under-carriage.
Folding the cot - Illustration 6-12
To disengage the cot, pull the lever under the cot towards you, uncoupling the
cot. Then, simultaneously press the plastic knobs at the side to lift the cot from
the under-carriage. Make sure both plastic sides of the cot are turned around a
quarter turn and make sure the hood of the plastic components are pulled up. Pull
the loops on the bottom of the cot to the centre. The cot can now be folded into
a flat position.
Usage of cot without under-carriage
To use the cot without the under-carriage you have to make sure that both plastic
parts of the cot are turned around until the cot is equal to the surface it stands
on.
Folding the chassis - Illustration 13 – 15
Pull up on the safety pin at the right side of the frame and pull the folding mech-
anism at the same time with both index fingers than push the frame down to fold
the under-carriage. Slide both the adjustment handles of the push bar down at
the same time and push the push bar right down to the ground. Than make sure
the transportation lock is secured.
22
City Twin
Unfolding the City Twin
Unfolding the stroller - Illustration 1-3
The under-carriage is fitted with a safety pin for transportation. To unbolt it, turn
the pin down. Turn the under- carriage upside down and unfold the stroller. Ensure
that the plastic plates, left and right, click firmly into place. The height of the push
bar is adjustable by pushing the adjustment buttons, left and right, at the same
time.
Wheels - Illustration 4 - 6
Take the two bigger wheels and place one on each axle, making sure to simulta-
neously press the spring down. Ensure the wheels are secure and check the tire
pressure. If necessary, fill the tires with air with the optional Firstwheels pump.
The maximum tire pressure is 28PSI (2.0 bar).
Take the two smaller front wheels and place one at each end of the plastic black
part. Secure in place with the white plastic clip, cover this with the black cap till
it clicks firmly into place.
Brake - Illustration 7-8
Pushing the lever down, in between the back wheels, activates the brake. To
release the brake, pull the same lever up again with your foot.
Stroller seat - Illustration 9
Make sure the connecting piece of the seat fits exactly on the adaptor of the
under-carriage and ensure it clicks firmly into place. The seat may be placed
facing the front or the back.
23