Proper Use; Technical Information; Important Safety Advice - Parkside PES 600 Instrucciones Para El Manejo Y La Seguridad

www.kompernass.com +++ www.kompernass.com +++ www.kompernass.com +++
Dear Customer, We are delighted that you have decided to purchase our high quality random orbital sander
PES 600. Please make sure you familiarise yourself fully with the way the equipment works before you use it for
the first time and that you understand how to handle electrical power tools correctly. Please read the operating
instructions
the indicated purposes. By doing this you will be able to work with a high level of safety and produce better
results. We hope you enjoy using your random orbital sander.

PROPER USE

The random orbital sander is intended for dry-sanding and polishing wood, metal and paint. Always use a sanding
disc and grade of grit suitable for the particular surface you are sanding. The speed selected should also be
appropriate. Any other use or modification to the random orbital sander shall be considered as improper use and
could give rise to considerable dangers. The manufacturer will not accept liability for loss or damage arising from
improper use.
FEATURES OF THE RANDOM ORBITAL SANDER PES 600
DUO-START front handle
DUO-START manual switch
ON / OFF switch
Locking button

TECHNICAL INFORMATION

Nominal voltage:
Nominal power:
Oscillation speed:
Eccentricity:
Backing pad ø:
Weight:
Protection class:

IMPORTANT SAFETY ADVICE

• Please read the additional advice in the accompanying booklet called "Safety advice".
• The sander is not designed for wet sanding and therefore must be used for dry sanding only.
• It must not be used on any materials containing asbestos.
• Wear ear protectors. Look after your health – please wear safety glasses and a breathing/dust mask.
• Please take note that working with stone, wood and materials containing lead may give rise to dusts that are
hazardous to health.
• Always keep the mains cable away from the working area of the sander and lead away the cable from the rear.
• If the mains lead becomes damaged it must be replaced by a special lead, which can be obtained from the
manufacturer or his service department.
RANDOM ORBITAL SANDER PES 600
below and the accompanying safety advice
DUO-START
DUO-START
230 V ~ 50 Hz
max. 600 W
n 5,000 – 16,000 rpm
0
max. 5 mm
150 mm
approx. 3.0 kg
II /
carefully. Use the tool only as described and for
Backing pad
Ventilation slots
Rotation speed selector wheel
Dust collection box
· Sound pressure level:
· Sound power level:
· The weighted vibration according
to the Hand-Arm System:
t
8 8
dB(A)
dB(A)
a hw = m/s 2