Publicidad
Installation
1 Insert the Hanging Mount Adaptor to 1.5" NPT screw-thread (female) pipe
or to the Wall/Ceiling/Parapet Mount Adaptor (SCX-300WM/300CM/
300LM) and turn it clockwise to secure to the Pipe or Adaptor.
Make sure you fix the Pipe or Adaptor so that it reaches to the end of the
1.5" NPT screw thread on the Hanging Mount Adaptor. If not secured tightly,
the Hanging Mount Adaptor may loosen from the Pipe or Adaptor, causing
physical damage or malfunction.
(Make sure you check the connection between two components before
proceeding with the next step.)
2 Apply Grease to the provided Bush as accessory.
3 Insert the cables into each applicable hole of the Bush. Please see the
figure below to check the arrow direction for inserting the cable into the
Bush.
If you want to use the additional ETC cable, insert the cable after removing the Pin.
BNC Cable
Power (24V)
Cable
Bush
Bush
ETC Cable
4 Insert the Bush into the Hanging Mount Adaptor.
If the Bush is not secured correctly, waterproofness will not be effective. Therefore,
secure the bush to the Hanging Mount Adaptor tightly by pressing each side of the
Bush evenly.
5 Install the Hanging Mount Adaptor onto the camera.
Make sure you insert the Adaptor in the right direction.
Bush
Pin
Bush
Product Specifications
Bush
Hanging Mount Adaptor
Product Outline
Weight : 500g
Material : Aluminum
Operation temp. : -50°C~60°C
Operation hum. : 0~100%
Poids : 500g
Matériau : Aluminium
Température de fonctionnement :
-50°C~60°C
Humidité de fonctionnement :
0~100%
Gewicht : 500g
Material : Aluminium
Betriebstemperatur : -50°C~60°C
Betriebsluftfeuchte : 0~100%
Peso : 500g
重量 : 500g
Material : Aluminio
材質 : アルミニウム
Temp. funcionamiento : -50°C~60°C
動作温度 : -50°C~60°C
Hum. funcionamiento. : 0~100%
動作湿度 : 0~100%
Peso : 500g
: 500g
Materiale : Alluminio
:
Temperatura di esercizio : -50°C~60°C
Umidità di esercizio : 0~100%
무게 : 500g
재질 : Aluminum
사용 온도 : -50℃~60℃
사용 습도 : 0~100%
: -50°C~60°C
: 0~100%
AB68-00873C
Publicidad
