Metra 95-93078 Manual Del Usuario página 3

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

7. Remove the (2) Phillips screws
securing the panel located inside the
left side of the glove box cavity, and
then remove the panel. (Figure F)
8. Remove the (3) Phillips screws
securing the glove box to the
lower dash panel, and then let the
assembly hang. (Figure G)
9. Remove the (4) Phillips screws
above the glove box, the (1) behind
the cover on the right side of the
lower dash panel, and the (2) on
the lower dash panel to the left of
the radio. (Figure H)
10. Remove the (4) Phillips screws
securing the radio sub-dash panel
to the lower dash panel. (Figure I)
Note: These (4) screws will be
reused in kit assembly.
Dash Disassembly
11. Carefully pull the right side of the
lower dash panel outward to gain
access to the radio sub-dash panel,
and then remove the radio sub-
dash panel from the radio cavity.
(Figure J)
Continue to kit assembly
(Figure F)
95-9307B
(Figure G)
(Figure H)
3
(Figure I)
(Figure J)

Publicidad

Tabla de contenido
loading

Tabla de contenido