Bosch DVA-08E Guía De Instalación Rápida página 96

96 en | Connecting a Digital Video Recorder
To configure a VIDOS NVR:
NOTICE!
Before you proceed make sure that the VIDOS NVR service is stopped or has not been
i
installed. For installing a VIDOS NVR and assigning drives, refer to your VIDOS NVR manual.
The drive letter can only be assigned upon the first installation of the VIDOS NVR. The VIDOS
NVR setup must rerun if the drive letter has changed.
1.
2.
3.
4.
5.
6.
F.01U.027.800 | V4 | 2008.08
Click the Windows Start button, and then click Control Panel.
In Control panel, double-click Administrative Tools.
In Administrative Tools, double-click Computer Management.
In Computer Management, click Disk Management. All drives are shown.
If the subsystem is properly connected, the Disk Manager will start the Initialize and
Convert Disk Wizard.
Click Next to open the following dialog box.
Select the appropriate check boxes of the disks you want to initialize, and then click Next
to open the next dialog box.
Quick Installation Guide
RAID Subsystem DVA-08E, -08K, -16K
Bosch Security Systems