Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Application examples
Sat IF 950-1950 MHz anlogue
Mounting
The described units are only designed for extending satellite receiving systems. Any other use or the
!
non-observance of this user guide will result in the loss of warranty. The Sat IF distribution system
must be installed only in dry rooms. Do not install on or next to easily inflammable material. For heat
Attention
Achtung
dissipation, the air must be able to circulate. The units must be grounded (copper wire min. 4 mm
Attention!
Mounting:
Preferably wall mounted
Mounting material:
Wood screws, max. 4 mm Ø
Screw-on plugs 75 Ω (series F)
Connectors:
acc. to IEC 60169-24
Attention! A larger diameter than
1.2 mm and burr can damage the
connection points of the unit.
Dimensions
The safety requirements acc. to EN 50083-1 + A1 and
EN 60065 + A 11 must be observed.
Terrestrial
antenna
22 kHz on!
Diameter
0,6-1,2mm free
from burr
Attention!
Connection time delay of the
power unit ca. 4 sec.
Max. length 2mm
Torque max. 3 Nm
(Danger to strip)
2
)
Publicidad
Tabla de contenido
