Cleaning, Maintenance And Storage; Ec Declaration Of Conformity; Protecting The Environment - Black and Decker SK2000 Manual De Instrucciones

ENGLISH
Weighing
Place the scale on a flat surface.
N
Place the product to be weighed on the scale and read off
N
the weight in the display (3).
When using a bowl, first correct the tare as described
N
above. Put the product to be weighed in the bowl, place
the bowl on the scale and read off the weight.
If the weight exceeds the maximum capacity, the display
N
will show "o-Ld". To prevent damage to the appliance,
immediately remove the weight from the scale.

Cleaning, maintenance and storage

Warning! Before cleaning or maintenance, switch the
appliance off.
To clean the appliance, use only mild soap and a damp
N
cloth.
Do not use any abrasive or solvent-based cleaner.
N
Warning! Do not immerse any part of the appliance in water
or any other liquid.
Checking and replacing the batteries
If the display (3) shows "Lo", the batteries are too low
N
and must be replaced.
Periodically open the battery compartment (5) and check
N
the batteries for corrosion.
To replace the batteries, open the battery compartment
N
and remove the old batteries. Place new batteries,
as indicated by the diagram inside the compartment.
When disposing of batteries, follow the instructions given
N
in the section "Protecting the environment".

Protecting the environment

Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand for
raw materials.
4
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at the
address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com
Technical data
SK2000
Capacity
Batteries
Batteries
At the end of their useful life, discard batteries with
due care for our environment. Take them to any
authorised repair agent or a local recycling station.

EC declaration of conformity

Black & Decker declares that these products conform to:
89/336/EEC, EN 50081, EN 55014
Spennymoor, County Durham DL16 6JG,
Guarantee
Black & Decker is confident of the quality of its products and
offers an outstanding guarantee. This guarantee statement is
in addition to and in no way prejudices your statutory rights.
The guarantee is valid within the territories of the Member
States of the European Union and the European Free Trade
Area.
kg 3
3x AAA
SK2000
Kevin Hewitt
Director of Consumer Engineering
United Kingdom
1-5-2006