Protecting The Environment; Technical Data; Ec Declaration Of Conformity - Black and Decker BD18RC Manual De Instrucciones

Protecting the environment

Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do
not dispose of it with household waste. Make this product
available for separate collection.
Separate collection of used products and
packaging allows materials to be recycled and
used again. Re-use of recycled materials helps
prevent environmental pollution and reduces
the demand for raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have
reached the end of their working life. To take advantage of
this service please return your product to any authorised
repair agent who will collect them on our behalf.
You can check the location of your nearest authorised
repair agent by contacting your local Black & Decker office
at the address indicated in this manual. Alternatively, a list
of authorised Black & Decker repair agents and full details
of our after-sales service and contacts are available on the
Internet at: www.2helpU.com
Batteries
Black & Decker batteries can be recharged
many times. At the end of their useful life, discard
batteries with due care for our environment.
♦ Do not short-circuit the battery terminals.
♦ Run the battery down completely, then remove it from
the tool.
♦ NiCd and NiMH and Lithium Ion, batteries are recyclable.
Place the battery in a suitable packaging to ensure that
the terminals cannot be short-circuited. Take them to
any authorised repair agent or a local recycling station.

Technical data

Input voltage
Output voltage
Weight
Battery
Voltage Vdc
Capacity Ah
Weight kg
Charger
Voltage
Approx charging time
Weight

EC declaration of conformity

BD18RC
Black & Decker declares that these products conform to:
EN60065, 2006/95/EEC
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of
Black & Decker.
Director of Consumer Engineering
Spennymoor, County Durham DL16 6JG,
ENGLISH
BD18RC
Vdc 18
Vac 11.4
kg 1.9
NiCd NiMH
18 18
1.5/1.7 1.5
0.8 0.8
Vac 230
h 6-9
kg 0.5
Kevin Hewitt
United Kingdom
01-06-2008
7