Adjusting The Chronograph Hands To Zero Position - Candino C4477 Manual Del Usuario

adjustIng thE Chronograph
hands to ZEro posItIon
Minute counter Centre stop-sencond
1 / second counter
10
Push button A
Push button B
20
Example:
One or several chronograph hands are not
in their correct zero positions and have
to be adjusted (e.g. following a battery
change).
Pull out the crown to position II (all 3
chronograph hands are in their correct
or incorrect zero position).
Keep push-buttons a and b depressed
simultaneously for at least 2 seconds
(the centre stop-second rotates by
360° corrective mode is activated).
adjusting the centre stop second
a 1 x short
Single step
Continuous a long
adjusting the next hand b
adjusting the 1 / second counter
10
hand (position 6h)
Single step a 1 x short
Continuous a long
adjusting the next hand b
adjusting the minute counter
(position 9h)
Single step a 1 x short
Continuous a long
Returning the crown to position I
Termination of the chronograph
hands adjustment (can be carried
out at any time).
21