Acson OM-WCCH-0703 Manual De Instrucciones página 3

B. Main Menu
1. Changes can be made to the factory setting parameter. This is done in the Main Menu. Press
ENTER button to go into the Main Menu.
2. The Main Menu consists of Operation Menu, Settings Menu, Timer Menu, Alarm Menu and
Display Menu.
How to use the Main Menu?
Step 1
Press ENTER to view the sub-Menu under Main Menu.
Step 2
Go to the sub-Menu you want by pressing the 5 or ∞ button. Press ENTER to select the sub-Menu.
Step 3
Go to the parameter you want to change or view by pressing the 5 or ∞ button. Press ENTER to
select this parameter.
Step 4
Change the parameter by pressing the 5 or ∞ button. Once completed press ENTER.
Press ESC to go back to previous screen until you see the initial display screen.
Note: The Set Parameter in the setting menu requires password for any changes to or to view its
parameter.
CAUTION:
All the password entering must be done by local dealer / serviceman. User is not allowed to
change the value of the set parameter as this may cause damage to unit or deter its operation.
Operation Menu
This menu enables us to set the units status (on or off), set the unit operation mode,
set the water in temperature and manually defrost the unit (applicable for heating mode only).
Setting Menu
This menu enables us to set the panel ID (factory setting is [00]), set parameter for unit operation
(requires password entering), change password and set panel option.
The panel option enables us to set the LCD backlight and contrast, set the alarm buzzer, enable and
disable the screen saver and set a screen saver timeout and set the temperature display in °C or °F.
Timer Menu
This menu enables us to set the clock, set the date, set a 7 days schedule to start and stop the unit
and enable or disable the set schedule.
Alarm Menu
This menu enables us to view the alarm history and also clear the record. The panel can keep up
to 20 fault / alarm records.
Display Menu
This menu enables us to view the defrost sensor(s) temperature, discharge sensor(s) temperature
and compressor(s) run time.
OM-WCCH_(ENG)
2
2 4/1/04, 5:18 PM