Operation - Duronic HV051 Manual De Instrucciones

Operation

PLEASE READ THE
INSTRUCTIONS IN FULL
BEFORE USING THIS
HEATER.
1.Check that the unit is at:
- [OFF] position (Fig. 1 ).
-The Temperature Control
Knob is at [OFF] position
(Fig. 2).
- Also the power at Low Heat
Position (Fig. 3)
2.Plug in the power cord to a
suitable electrical outlet.
(Rated not less than 10 AMP)
3.Press the ON/OFF switch to
[ON] position.
At this moment, its light
indicator is on.
4. Turn the temperature control knob to
your desired temperature. The light
indicator and heater will turn on until the
room has reached the desired
temperature. It will then automatically
turn off until the room temperature drops.
The heater will then turn on again so that
the desired room temperature is
maintained. According to personal needs
you can adjust the temperature control
knob to increase or decrease the room
temperature.
12