First Access To The Dvr - Fracarro Firenze 16.1 DVR Guía De Referencia Rápida

Quick Reference DVR FIRENZE
10 Turn On the DVR using the apposite buttom on the rear panel of
the DVR. The DVR will show the message:
"Unformatted HDDs found. Do you want to format now?
[ENTER]: Yes, [ESC]: Cancel". Press the [ENTER] button to
format the hard disk.

4.3 First access to the DVR:

•
Login
After turning on the DVR, press the "MENU" button and then move the cursor on the icon called "Login / Logout" and press
"ENTER".
Now enter the name and password. Parameters from the factory 's installer has a user name: "aa" and password "11". Move the
cursor on "Login" and confirm by pressing "ENTER".
There are three password levels in the system, including: Administrator (highest), Supervisor, and Operator (lowest). The
Operator can operate live video display, the Supervisor live video display, image playback and archive, and the Administrator
everything.
CAUTION: The factory setting of the DVR takes only one user configured as an administrator. In order to increase the
level of security you should use that user for only the first access and change the password as soon as possible.
WARNING: In case of loss of the system password please contact your local distributor who will contact Fracarro
Radioindustrie S.p.A.
•
Setting Language
Faithfully follow the steps below to configure the language of the DVR:
1. Press the "MENU" button to access the configuration menu;
2. Move the cursor to "SETUP" and confirm by pressing "ENTER";
3. Move the cursor to the "SYSTEM" and confirm by pressing "ENTER";
4. Using the arrow keys move the cursor to the "LANGUAGE" and press the keys "+/-" to set the desired language;
5. Press the "MENU" button to return to the previous menu, the DVR will be prompted to save the settings by pressing
the "ENTER";
6. Press "ENTER" to confirm the change of language. The system will restart with the new settings.
30/141