Safety Harness - Migo GR0 Manual De Instrucciones

Your Group 0+
1. Sunshade
2. Ergonomic handle
3. Shoulder seat belt guide (x2)
4. Handle release button (x2)
5. Reclined position control (x2)
6. Shoulder harness (x2)
7. Harness buckle
8. Lap belt guide (x2)
9. Seat release button (ISOFIX Solar base required for the ISOFIX attachment)
10. Crotch Strap
11.
Adjuster setting button
12. Insert cushion
13. Seat position control (x2)
14. Shoulder belt catch (to fit Group 0+)
15. Seat release handle (for a 3-point belt attachment)
16. Base shoulder belt guide

Safety harness

CAUTION! Secure your baby with the safety harness in all circumstances.
The car seat harness must be adjusted to the size of your child. The shoulder harnesses can
be adjusted to 2 different heights, and should be run through the nearest button holes to
your child's shoulders.
Pass the straps through the slots in the cushion, cover, and shell
straps at the required height by reversing the above procedure and make sure you use the
same slots for both the shell and the cover.
• To loosen the harness: Press the adjuster at the front of the car seat between the child's
legs and pull on the shoulder harnesses simultaneously (5).
• To tighten the harness: Simply pull on the adjustment strap at the front of the car seat
(6).
Installing the child in the Car Seat
Open the harness by pressing on the red button in the centre of the buckle. Position your
child in the car seat, ensuring that their back is resting correctly against the back of the car
seat.
Bring the two ends of the straps together and fasten the harness buckle
hear it 'click'. Tighten the harness by pulling on the adjustment strap until the straps are
tight enough.
CAUTION! A well-adjusted harness actively contributes to the best possible protection
of your child. You should only be able to fit one finger between the harness and the
child's body.
Adjusting the ergonomic handle
The car seat handle can be set in 3 positions. To move from one position to another, press in
(1)
Ensure the harness straps are not twisted.
(2) (3) (4). Reposition the
(7) (8). You should
GB
7