Publicidad
Idiomas disponibles
Idiomas disponibles
GLOBOX APPLICATIONS:
A light box is an indispensable tool for a whole range of hobbies and craft work...
EMBOSSING
Tape a stencil face down on the plastic surface. Place a card or paper face down over the stencil. Use a ball stylus to trace
the stencil design outline with a fi rm, but not excessive pressure.
CALLIGRAPHY AND LETTERING
Trace script styles from calligraphy books or even unique lettering from your computer to create custom greeting cards,
stationary, signs, etc.
SCRAPBOOKING
Make cut-outs, borders and mounts to decorate pages and enhance photos and souvenirs in memory albums.
CARTOONING AND DRAWING
Trace any design, illustration or cartoon for hours of fun and creativity.
PARTS LIST:
1. Cover/Lid ........................................................ 151-693
2. Plastic Viewing Surface .................................. 151-696
3. Multi-Purpose Palette ..................................... 151-697
4. 9V AC Adapter ................................................ 145-393
5. 6-watt F6T5 Daylight Fluorescent Lamp ........ 106-055
The fluorescent lamp is available from a local hardware supply store or
directly from Artograph via our toll-free number at 1-888-975-5555, or online at
www.artograph.com.
MAINTENANCE:
CLEANING: Clean the plastic surface and palette with a soft cloth and non-abrasive cleaner.
Do not apply cleaner directly onto light box as it may seep inside the unit.
LAMP REPLACEMENT: (See Figure 3)
Caution: Be certain that the GLOBOX is unplugged and the power is off before replacing the lamp.
Figure 3
OTHER ARTOGRAPH PRODUCTS
Artograph manufactures a full-line of opaque art projectors, light boxes and spray booths. Please visit us at www.artograph.
com for more product information.
To Remove Lamp:
1.
Pry open the side edge of the plastic tracing surface and remove with a
screwdriver as indicated in the diagram.
2.
Grasp lamp with both hands and turn it approximately a ¼ turn towards you
until the tension releases Lift and remove the used lamp.
To Reinstall Lamp: (See Figure 4)
1.
Insert both ends of the lamp with the
prongs vertical into the lamp socket.
2.
Turn the lamp approximately ¼ turn
toward you until you feel it lock into
place.
3.
Snap plastic tracing surface back into
place using slight pressure on all four
sides.
2838 Vicksburg Lane North, Plymouth, MN 55447 USA
Tel: 888-975-9555
Fax: 763-553-1262
info@artograph.com
2
4
3
www.artograph.com
1
Figure 4
5
(inside)
Publicidad
