Keller CellaTemp PR Serie Manual Del Usuario página 8

Quick Start Guide CellaTemp
Make sure that the function of the pyrometer is correct. A detailed description of all parame-
ters can be found in the operating instructions.
5. It is advisable to take the checking of the pyrometer in the maintenance plan.
EN
The pyrometers of the PR 1x series are only measuring exact results in the state of
thermal stabilization. The break-in period is approximately 10 minutes after starting the
supply voltage.
IO-Link
This device has an IO-Link communication interface, which requires an IO-Link-capable module
(IO-Link master) for operation. The IO-Link interface allows direct access to process and diag-
nostic data and offers the possibility to parameterize the device during operation.
The IODDs required for configuring the IO-Link device as well as detailed information on pro-
cess data set-up, diagnostic functions and parameter addresses are available in the download
area at www.keller.de/its/pyrometer.
A 3-wire cable port Class A (Type A) must be used for IO-Link operation.
Shipping, packaging and disposal
Inspection after shipping
Unpack and inspect the entire shipment immediately upon receipt to make sure it is complete
and undamaged. If the container/package shows visible signs of damage, please refuse the
shipment. If this is not possible, accept the shipment on the condition that the freight carrier's de-
livery record is noted with the extent of the damage in order to file a claim. Should you discover
a concealed loss or damage, report it to the shipper or freight carrier immediately. If the period
for filing claims has expired, you will no longer be able to make any claims for compensation
of damage or loss.
Packaging
The packages used are made of carefully selected, environmentally compatible materials and
are thus recyclable. Please ensure that they are disposed of in an ecologically sound manner.
Disposal of the old devices
is a registered trademark of the IO-Link corporate community.
PR xx
®
Old electrical and electronic devices frequently still contain valuable mate-
rials.
These devices can be returned for disposal to the manufacturer or they
must be disposed properly by the user.
For the improper disposal of the device by the user, the company KELLER
is not responsible.