Cleaning And Maintenance; Regular Cleaning - Anjou AJ-ADA007 Guia Del Usuario

Ocultar thumbs

Contenido

Tabla de contenido

Idiomas disponibles

4. Link "Anjou Diffuser" account to Google Home:

1) On the Home page, tap

at the bottom right corner, select "Home Control", and then tap

bottom right corner.

2) Tap "Anjou Smart", enter the user name and password of your "Anjou Diffuser" account and choose

the region.

3) Tap "Link now" to finish linking. Then assign the room where the device is. Your device will be

listed in Devices of Home Control.

5. Now you can use Google Home to control your diffuser.

·Turn on/off the mist

Voice command: "OK Google, turn on / turn off + Your device name".

·Turn on/off the light

Voice command "OK Google, turn on / turn off + Light name".

Notes:

1. If the device name has been changed, you need to re-discover the device for voice control.

2. Light and aroma names are preset and cannot be edited.

at the

Regular Cleaning

1. Empty the tank.

2. Add 3-5g (approx. one teaspoon, based on scale of the residues) baking soda / NaHCO3 to the tank.

4. Soak for 3-5mins, wipe down the tank and tank cover using a small brush or soft cloth with baking

soda solution. (For better cleaning, remove the muting cover and wipe it down thoroughly).

5. Drain the solution and rinse the tank under tap water.

6. Rub the inside and outside dry with a dry towel or clean cloth.

7. Wipe off the soda residues if any.

Scale Removal

1. You are recommended to deep clean your diffuser once a month or when the mist output is low due to

grime build-up.

2. Empty the tank from the water outlet.

3. Add 2-3 teaspoons of baking soda / NaHCO3, or 2-3 slices of fresh lemon to the tank.

about half an hour.

5. Thoroughly clean the grime at the bottom of the tank and atomizer with a small brush.

6. Wipe down tank cover using a small brush or soft cloth with baking soda solution. (For better cleaning,

remove the muting cover and wipe it down thoroughly).

7. Drain the solution and rinse the tank under tap water.

8. Wipe off the soda residues if any.

9. Rub the inside and outside dry with a dry towel or clean cloth.

Notes:

1. You may use dishwashing detergent when baking soda is unavailable. But it works better for oil

removing instead of odor and mineral buildup.