Protecting The Environment; Ec Declaration Of Conformity - Black and Decker MT3000K Manual De Instrucciones

On very uneven surfaces, or when removing layers of
x
paint, start with a coarse grit. On other surfaces,
start with a medium grit. In both cases, gradually change
to a fine grit for a smooth finish.
Use the abrasive pad for removing rust.
x
Consult your retailer for more information on available
x
accessories for sanding, polishing, stripping and scrubbing.
Preparation
Choose the correct type of blade for the application. Use
x
the claw blade for loose or flaking paint. Use the flexible
blade for soft materials. Use the rigid blade for hard materials.
Push or pull the blade steadily over the surface material.
x
Note that the blade will not move until it is pressed
against the material.
Do not exert too much pressure on the tool.
x
Maintenance
Your tool has been designed to operate over a long period of
time with a minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and regular cleaning.
Regularly clean the ventilation slots in your tool using
x
a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth.
x
Do not use any abrasive or solvent-based cleaner.
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
Safely dispose of the old plug.
x
Connect the brown lead to the live terminal in the new plug.
x
Connect the blue lead to the neutral terminal.
x
Warning! No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality
plugs. Recommended fuse: 5 A.

Protecting the environment

Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand for
raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at the
address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com
Technical data
Voltage
Power input
Screwdriver:
No-load speed
Bit holder
Max. drilling capacity in steel/wood
Sander:
Oscillations (no load)
Preparation:
Strokes (no load)
Weight
with screwdriver head
with sander head
with preparation head

EC declaration of conformity

MT3000K
Black & Decker declares that these products conform to:
98/37/EC, 89/336/EEC, 2002/95/EC, EN 60745, EN 55014 ,
EN 61000
L (sound pressure) 80 dB(A), L
pA
hand/arm weighted vibration 6,1 m/s
K (sound pressure uncertainty) 3 dB(A),
pA
K (acoustic power uncertainty) 3 dB(A)
WA
Spennymoor, County Durham DL16 6JG,
ENGLISH
MT3000K
V 230
AC
W 80
min -1 250
mm 6.35 hex
mm 4.0-6.0
-1
min 8,500
-1
min 8,500
kg 1.3
kg 1.25
kg 1.25
(acoustic power) 91 dB(A),
WA
2
Kevin Hewitt
Director of Consumer Engineering
United Kingdom
1-12-2004
7