General Introduction; How It Works - Sinbo SAH 6109 Manual De Instrucciones

SINBO SAH 6109 ULTRASONIC HUMIDIFIER
INSTRUCTION MANUAL
1. SPECIFICATIONS:
Voltage: AC230V~50Hz
Power: 35W
Water Tank: 5.0L
Maximum: 400 ml/h
2. COMPONENTS
1. Sprayer
2. Water lid
3. Water Groove
4. Vent
5. Water Level Detector
6. Mist Intensity Controller
7. Power Switch
8. Handle
9. Water Tank
10. Transducer
11. Base

3. GENERAL INTRODUCTION

Humidifier SAH-6109 is made of recyclable plastic of edible grade. It can work continuously
for over 14 hours with maximum mist intensity. Smooth mist, anion-refreshing, power
saving, quiet, auto-stop and long service life are its main features.

4. HOW IT WORKS?

As per the vibrating theory of ultrasonic waves, the humidifier divides water drops into
particles sized 1 – 5 µm. Then the particles are diffused by motor-driven devices - fan.
During this course, a large quantity of anions are produced and diffused. That's how this
humidifier works to humidify and refresh the air.
5. HOW TO USE?
A. The best environment temperature for the humidifier is ranged from 0˚C to 40˚C.
Place it in a room for half an hour before the first use.
B. It is recommended to use softened and boiled water or distilled water. The water
temperature should be no more higher than 40˚C.
C. Take the water tank from the base, open the water lid by turning it anticlockwise, fill
in water, make sure that the silicon washer is well fitted in its place and then close the
ENGLISH
1
2
3
5
6
7
- 7 -
8
9
4
10
11