Wall Tracks Installation - Jacuzzi SAVANNAH GLASS Manual De Instrucciones

1. Level the tracks (B) and mark the track holes' positions. 4 holes for each track.
2. Remove tracks and drill pilot holes in the marked locations with a Φ6mm (1/4in) drill bit.
3. Insert the wall anchors (FF) using a rubber mallet until the wall anchors are flush with the wall.
4. Replace and secure the 3 metal tracks (B) with screws (CC). Do not overtighten.
Helpful Hint
Make sure there
is a support stud
located behind the
drywall, behind the
tracks!
25mm
1in

WALL TRACKS INSTALLATION

172mm
6 3/4in
40mm
1 9/16in
Helpful Hint
Do not overtighten!
This may crack the
acrylic walls.
10
1
B
2
Φ 6mm
1/4in
3
FF
4
CC