A
Plug in your Mini Box
Before you get started, we recommend you use the new cables included in your kit.
1
First, screw one end of the
coax cable
where your previous cable box was connected) and the other end into the "Cable from Wall"
port on the back of your Mini Box.
Then, plug the blue end of the
HDMI cable
Mini Box and plug the other black end into the desired HDMI port on your TV.
If your TV doesn't have an HDMI port, then you can use another coax cable instead. Tune your
TV to channel 3 or 4 and ensure that the toggle switch on the back of the Mini Box matches the
TV channel you selected. Note, using this connection method only supports standard definition.
3
Lastly, connect the
power cord
into the power port on the back of your Mini Box and
plug the other end into an electrical outlet.
1
Quick start instructions
into an active cable outlet (try the same outlet
2
into the HDMI port on the back of your
3
2
B
Activate your Mini Box
Start by turning on your TV.
Using the source or input button on your original TV remote, select the HDMI connection
that matches the HDMI port you plugged the cable into earlier.
Then hang tight for a few minutes for the activation to finish.
If you'd like to pair your new Cox remote to your TV, just follow the steps listed on the
back of the remote.
We're here to help
C
For quick how-to videos and troubleshooting support, visit Cox.com/support.
For help programming your remote, visit Cox.com/remote-help.
A quick reboot fixes many issues – just unplug the power cord from the wall, wait 10 about
seconds, then plug it back in. It may take a few minutes to reset. Also make sure all of the
connections are tight and fully plugged in.
APP: Cox Connect for 24/7 support and helpful videos
WEB: Cox.com/support and Cox.com/learn
CHAT: text an agent at 54512 or live chat on Cox.com/chat
CALL: 1-888-556-1193