GB
Then press "
dechlorination, after water boiling, the buzzer sends out
"Di" "Di" sound. It will stop heating automatically after boiling 3
minutes and heard sounds like "Di" "Di", dechlorination finished.
4. (1).Press "
"
"button indicator light is on, and the kettle is under heat
insulation function, with red LED light shining. The indicator light
is till shinning after water is boiled and the kettle automatically
turns into heat insulation function in 2 hours, which will go on
heating when water temperature arrives at 85℃ till the
hours heat insulation time is completed .
(2).Press"
sound, "
under heat insulation function.
Press "
condition with the green LED light shining. This means that
when water temperature arrives at 50℃,it will boil to 60℃,and
the heat insulation function works in 2 hours.
Press "
condition with the blue LED light shining. This means that when
water temperature arrives at 60℃,it will boil to 70℃,and the
heat insulation function works in 2 hours.
Press "
condition with the yellow LED light shining. This means that
when water temperature arrives at 70℃,it will boil to 80℃,and
the heat insulation function works in 2 hours.
Press "
90℃ condition with the purple LED light shining. This means that
when water temperature arrives at 80℃,it will boil to
90℃,and the heat insulation function works in 2 hours.
5
"key, with the sound "Di" from buzzer, start
"for 2 seconds, with the buzzer sends out "di" sound,
"for 2 seconds, with the buzzer sends out "di"
"button indicator light is on, and the kettle is
"once, then the indicator light is under 60℃
"twice, then the indicator light is under 70℃
"thrice, then the indicator light is under 80℃
"the fourth time, then the indicator light is under
2