RiverRidge ELLSWORTH 06-025 Instrucciones De Ensamblaje página 9

Gabinete de piso de una puerta con repisas laterales

Idiomas disponibles

STEP 9

1. Attach center support panel (5) to rear support board (4) and arch shelves (3) by

inserting wood dowels into holes on center support panel (5).

2. Insert 4 wood dowel (C) into holes on end of top cross bar (11).

3. Attached top cross bar to center support panel (5) by inserting wood dowel (C) into holes

on center support panel (5).

STEP 10

1. Attach rear support board (4), center support panel (5) and right side panel (6) to bottom

board (2) by inserting cam bolts into cam lock holes and inserting wood dowels into dowel

holes on rear support board (4), center support panel (5) and right side panel (6).

2. Insert wood dowel (C) on top cross bar (11) into holes on right side panel (6).

3. Insert 6 cam locks (B) into cam lock holes on rear support board (4), center support panel

(5) and right side panel (6) and rotate clockwise to secure cam bolts (A).

Tabla de Contenido

Ellsworth 06-026