Barrette VERANDA 34107834 Instrucciones De Instalación página 4

4.
Assemble rails to uprights:
a. From bottom of upright mark at 1" (Fig. 8).
b. Align bottom of bracket (already connected to
railing in step 3a) to the line made in step 4a.
c. Pre-drill through angled holes through upright
and aluminum with
four (4) 2" screws as provided in the rail bracket
kit (Fig. 9).
5.
Install Bracket Covers:
a. For top bracket: open the top bracket cover and
wrap it around the top rail and bracket. Pre-drill
and secure underneath with two (2) 1" screws
as provided in the rail bracket kit (Fig. 10).
b. For bottom bracket: slide bottom bracket cover
snugly over the bottom bracket from below (Fig. 11).
6.
Mount hinges to gate:
a. Center the provided hinges on the upright to
align with the top and bottom rails of gate and
mark screw holes.
b. Pre-drill holes through aluminum insert (Fig. 12).
c. Screw in with two (2) 1" Phillips screws as
provided with the hinges.
4
⁄ " drill bit. Screw in with
5
32
1"
Pre-drill and install screws
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12