NIPRO Diagnostics TRUEresult Guia De Inicio Rapido

Scan this code with your smart phone
for additional TRUEresult information.
Always refer to the Owner's Booklet
for detailed product information.
Checking Your
Blood Glucose
Using TRUEresult
A guide for testing
your blood glucose
Simple Steps to
Test Your Blood Glucose
Blood Glucose Testing
1
Wash your hands with
warm, soapy water.
4
Allow a blood drop to form, touch Tip of Strip to top of blood
drop and allow blood to be drawn into Strip. Remove Test Strip
Sample Tip from sample drop immediately after Meter beeps
and dashes appear across Meter Display.
CAUTION! Holding the Test Strip Sample Tip to the blood
sample too long after the Meter begins testing may cause
inaccurate results.
WARNING!
NEVER reuse Test Strips. NEVER wipe Test Strips with water, alcohol or any cleaner.
DO NOT attempt to remove blood or control sample from Test Strips or clean Test
Strips and re-use. Reuse of Test Strips will cause inaccurate results. NEVER add a
second drop of sample to the Strip. Adding more sample gives an error message.
© 2012 Nipro Diagnostics, Inc. TRUEresult, TRUEtest and the Nipro Diagnostics logo are
trademarks of Nipro Diagnostics, Inc. E4NPD08 Rev. 23
Meter, Test Strips & System Components
®
Test Port
Test Strip
2
Remove Test Strip from vial
and insert into Test Port with
Contact End (TRUEtest name
facing up). The Meter turns on.
www.niprodiagnostics.com
Front
Display
Strip
Release Button
Contact End
(TRUEtest name
facing up)
Sample End
(Tip)
3
Lance your finger.
5
In as little as 4 seconds,
glucose result will be
displayed.
Back
6
Hold Meter in a vertical
position with Strip
pointing down. Press
Strip Release Button to
discard the used Strip.
This guide provides a brief overview on testing your
blood glucose. For more information on the TRUEresult
System, see your Owner's Booklet. For assistance using
your TRUEresult System, call our Customer Care at
1-800-803-6025.
Battery
Compartment
Meter
Label