Original or modified SPDIF: With this
surround format, the audio source is
output through the Dolby digital decoder
formed on the basis of the optical mouse
at the rear panel and the co-axial connector.
Interface for setting Dolby digital surround
A. Dual Mono
If the user's microphone/decoder can
output Dolby digital surround source,
he can select stereo, left channel, right
channel or mix channel.
B. Dynamic
Set this item to play the audio
contents in high volume at night
while not disturbing others. This
item can lower the volume, but keep
the original sound quality. The figure
below shows the range to be set from
the lowest to the highest volume, with
the unit dB.
Video Setup
A. Component
Use this item to set the video
output.
B. Quality
Use this item to set the image
quality of the output video.
11