Descargar Imprimir esta página
Ocultar thumbs Ver también para Hidden Storage:

Publicidad

Enlaces rápidos

Hidden Storage
WARNING:
!
• Failure to follow these warnings and assembly instructions could result in serious injury or death.
• Read all instructions before assembling crib. Keep instructions for future use.
• Do not use this crib if you cannot exactly follow the instructions that come with it.
WARNING:
!
• For toddler bed use, the minimum age shall be no less than 15 months, and the maximum weight shall not be greater
than 50 lb (22.7 kg).
• Infants can suffocate on soft bedding. Never add a pillow or comforter. Never place additional padding or mattress
under an infant.
• To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to sleep, unless
otherwise advised by your physician.
STRANGULATION HAZARD:
• Strings can cause strangulation! DO NOT place items with a string, cord or ribbon around a child's neck, such as hood
strings or pacifier cords. DO NOT suspend strings over crib or toddler bed, or attach strings to toys for any reason.
• To help prevent strangulation, tighten all fasteners. A child can trap parts of the body or clothing on loose fasteners.
• DO NOT place crib or toddler bed near window or patio door where cords from blinds or drapes may strangle a child.
FALL HAZARD:
• When child is able to pull to standing position, set mattress to lowest position and remove bumper pads, large toys
and other objects that could serve as steps for climbing out.
• When child is able to climb out or reaches the height of 35 inches (89 cm), the crib shall no longer be used and the child
should be placed in a youth or regular bed.
CAUTION: ANY MATTRESS USED IN
!
THIS CRIB SHALL BE AT LEAST 27 1⁄4 BY 51
5⁄8 IN. (69 CM BY 131 CM) WITH A
THICKNESS NOT EXCEEDING 6 IN. (15 CM),
AND WHEN IT IS PUSHED FIRMLY AGAINST
ANY SIDE OF THIS CRIB, IT DOES NOT
LEAVE A GAP OF MORE THAN 1 IN. (3 CM)
BETWEEN THE MATTRESS AND ANY PART
OF ANY OTHER SIDE OF THE CRIB.
• Check this product for damaged hardware, loose joints, loose bolts or other fasteners, missing parts, or sharp edges
before and after assembly and frequently during use. Securely tighten loose bolts and other fasteners. DO NOT use crib
if any parts are missing, damaged or broken. Contact Crate and Barrel for replacement parts and instructional literature if
needed. DO NOT substitute parts.
• If refinishing, use a non-toxic finish specified for children's products.
• Never use plastic shipping bags or other plastic film as mattress covers because they can cause suffocation.
• Infants can suffocate in gaps between crib sides and a mattress that is too small.
• To clean crib: Wipe with clean soft cloth dampened with a mild cleanser and water. Rinse with clean water using a soft
cloth, and dry thoroughly.
• Follow warnings on all products in a crib.
• When a vaporizer is in use, always aim vapor steam away from the crib as well as away from other wood furniture.
v.04 - 07/2018
Crib / Lit d'enfant / Cuna
800.967.6696 | crateandbarrel.com
1/24

Publicidad

loading

Resumen de contenidos para Crate&Barrel Hidden Storage

  • Página 1 Hidden Storage Crib / Lit d’enfant / Cuna WARNING: • Failure to follow these warnings and assembly instructions could result in serious injury or death. • Read all instructions before assembling crib. Keep instructions for future use. • Do not use this crib if you cannot exactly follow the instructions that come with it.
  • Página 2 Hidden Storage Crib / Lit d’enfant / Cuna MISE EN GARDE: • Il y a risque de blessure sévère ou d’accident mortel si les mises en garde et les instructions de montage ne sont pas rigoureusement respectées. • Lire attentivement toutes les instructions avant de procéder au montage du lit d’enfant. Conserver ces instructions pour s’y référer à...
  • Página 3 Hidden Storage Crib / Lit d’enfant / Cuna ADVERTENCIA: Al no seguirse estas advertencias y las instrucciones de ensamblaje pueden producirse lesiones graves o hasta la muerte. •Lea todas las instrucciones antes de armar la cuna. Guarde las instrucciones para uso futuro.
  • Página 4 Hidden Storage Crib / Lit d’enfant / Cuna English This page lists the contents included in the box. Please take time to identify the hardware as well as the individual components of the product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
  • Página 5 Hidden Storage Crib / Lit d’enfant / Cuna 4 - Small bolts 10 - Large bolts 16 - Screws 4 - Petits boulons 10 - Grands boulons 16 - Vis 4 - Pernos pequeños 10 - Pernos grandes 16 - Tornillos...
  • Página 6 Hidden Storage Crib / Lit d’enfant / Cuna 2 - End panels 1 - Back panel 2 - Panneaux de tête/pied de lit 1 - Panneau latéral arrière 2 - Paneles extremos 1 - Panel posterior 1 - Mattress support panel...
  • Página 7 Hidden Storage Crib / Lit d’enfant / Cuna 1 - Bottom panel 1 - Crossbar 1 - Panneau de fond 1 - Barre transversale 1 - Panel inferior 1 - Travesaño 1 - Drawer front (right) 1 - Drawer front (left) 1 - Devant de tiroir (côté...
  • Página 8 Hidden Storage Crib / Lit d’enfant / Cuna Fit wood dowels of drawer partition into corresponding holes of back panel as shown. Attach drawer partition to back panel with 2 large bolts, 2 spring washers, 2 flat washers and 2 half-moon brackets, using a small Allen wrench.
  • Página 9 Hidden Storage Crib / Lit d’enfant / Cuna Fit wood dowels of drawer partition into corresponding holes of crossbar as shown. Attach drawer partition with crossbar with 1 large bolt, 1 spring washer, 1 flat washer and 1 half-moon bracket, using a small Allen wrench.
  • Página 10 Hidden Storage Crib / Lit d’enfant / Cuna Fit wood dowels of back panel and crossbar into corresponding holes of end panel as shown. Secure end panel to assembly with 2 large bolts, 2 spring washers, 2 flat washers and 2 half-moon brackets, using a small Allen wrench.
  • Página 11 Hidden Storage Crib / Lit d’enfant / Cuna Fit wood dowels of front panel into corresponding holes of end panel. At the same time, fit wood dowels of drawer partition into corresponding holes of front panel. Attach front panel to end panel with 1 large bolt, 1 spring washer, 1 flat washer and 1 half-moon bracket, using a small Allen wrench.
  • Página 12 Hidden Storage Crib / Lit d’enfant / Cuna At this point, secure drawer partition to front panel with 1 large bolt, 1 spring washer, 1 flat washer and 1 half-moon bracket, using a small Allen wrench. A cette étape, à l’aide de la petite clé six pans, attacher la partition de tiroir au panneau latéral avant avec 1 grand boulon, 1 rondelle frein, 1 rondelle et 1 support en demi-lune.
  • Página 13 Hidden Storage Crib / Lit d’enfant / Cuna Fit wood dowels of crib assembly into corresponding holes of end panel. Attach end panel with 3 large bolts, 3 spring washers, 3 flat washers and 3 half-moon brackets, using a small Allen wrench.
  • Página 14 Hidden Storage Crib / Lit d’enfant / Cuna With the assistance of another adult, carefully position crib assembly upright as shown. Using a small Allen wrench, secure each top corner with 1 small bolt, 1 spring washer and 1 flat washer as shown. Do not over tighten the bolts.
  • Página 15 Hidden Storage Crib / Lit d’enfant / Cuna Insert bottom panel into crib assembly as shown. Make sure notch of bottom panel is positioned into crib properly. Faire coulisser le panneau de fond dans le lit d’enfant ainsi assemblé, selon le schéma. S’assurer d’avoir correctement orientée la découpe du panneau de fond.
  • Página 16 Hidden Storage Crib / Lit d’enfant / Cuna high / position haute / alta middle / position médiane / media low / position basse / baja Fit each corner support into corresponding Determine the desired height (high, middle or low) for the crib mattress.
  • Página 17 Hidden Storage Crib / Lit d’enfant / Cuna Fit corner supports into corresponding holes of mattress support panel as shown. Make sure mattress support is securely supported by corner supports. Insérer les supports pour les coins dans les trous correspondants du panneau de support du matelas, selon le schéma.
  • Página 18 Hidden Storage Crib / Lit d’enfant / Cuna Secure each corner support to mattress support panel with 4 bolt caps as shown, using a large Allen wrench. A l’aide de la grande clé six pans, attacher chaque support pour les coins au panneau de support du matelas avec 4 capuchons pour boulon, selon le schéma.
  • Página 19 Hidden Storage Crib / Lit d’enfant / Cuna Attach drawer left side to drawer front with 2 screws as shown. Secure, but do not over tighten, with a Phillips head screwdriver. A l’aide d’un tournevis Phillips, attacher le côté gauche de tiroir au devant de tiroir avec 2 vis, selon le schéma.
  • Página 20 Hidden Storage Crib / Lit d’enfant / Cuna Insert drawer bottom into corresponding notches of drawer assembly as shown. Faire coulisser le fond de tiroir dans les rainures correspondantes du tiroir ainsi assemblé, selon le schéma. Inserte el fondo del cajón en las muescas correspondientes del ensamblaje del cajón como se muestra.
  • Página 21 Hidden Storage Crib / Lit d’enfant / Cuna Using a Phillips head screwdriver, attach drawer back to drawer assembly with 2 screws as shown. A l’aide d’un tournevis Phillips, attacher le panneau arrière de tiroir au tiroir ainsi assemblé avec 2 vis, selon le schéma.
  • Página 22 Hidden Storage Crib / Lit d’enfant / Cuna Using a Phillips head screwdriver, attach drawer right side to drawer assembly with 4 screws as shown. At this point, repeat steps 12-15 for remaining drawer assembly. A l’aide d’un tournevis Phillips, attacher le côté droit de tiroir au tiroir ainsi assemblé à l’aide de 4 vis, selon le schéma.
  • Página 23 Hidden Storage Crib / Lit d’enfant / Cuna Carefully align drawer glides of left and right drawer assembly into corresponding drawer glides of the crib assembly. Assembly is now complete. Avec précaution, faire coulisser les glissières des tiroirs côté gauche et droit dans les glissières correspondantes du lit d’enfant.
  • Página 24 Hidden Storage Crib / Lit d’enfant / Cuna CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.  Once the crib is in use, periodically check to make sure all bolts are tight, and tighten as necessary. For future use, keep these instructions in the envelope attached to the mattress support.