Mr Handsfree STEREO BOOMM Manual Del Usuario página 6

- Plug the male antenna plug from the StereoBOOMM
• If the car has DIN type (1), make the connection directly.
• If the car has ISO type (2), make the connection via the conversion plug (3).
• If the car has FAKRA type, make the connection via the conversion plug (4.1).
- Select a frequency with the 4 dip switches on the StereoBOOMM
quency table is printed on the backside of your StereoBOOMM
Please take a close look at this frequency table!
- Connect the + wire to the red or yellow wire with a fuse, that goes to your car radio.
We recommend to connect the + wire of the StereoBOOMM
m_StereoBoomm_GB.indd 4 m_StereoBoomm_GB.indd 4
®
into the car radio.
®
to the Ignition wire.
GB - 4
®
. The fre-
®
and below.
07.12.2007 19:12:45 07.12.2007 19:12:45