Sun Microsystems Fire V880 Manual De Instrucciones página 4

Attaching the Short Rear Bracket Onto the Outer
Slides
The following instructions replace Step 3 of the procedure "Installing the Tray
Assembly Into the Cabinet" in the Sun Fire 880 Server Rackmounting Guide. Follow
these Steps only if you are installing the system into a 31.5-inch (80-cm) rail-to-rail
rack.
3. Remove the long rear brackets attached to the rack tray assembly outer slides.
Remove the two 10-32 screws and lock nuts using a Phillips screwdriver.
Lock nuts
en-2 Sun Fire V880 Server Short Rear Bracket Rackmounting Supplement • February 2002
Rear bracket
10-32 screws
Rear
bracket
Outer
slide