Volume Adjustment - DeWalt DWST1-75659 Manual Del Usuario

Faulty Battery Packs
This charger will not charge a faulty battery pack. The charger
will indicate faulty battery pack by displaying an X on the LCD
battery image. If this occurs, re-insert the battery pack into
the charger. If the problem persists, try a different battery
pack to determine if the charger is working properly. If the
new pack charges correctly, then the original pack is defective
and should be returned to a service center or other collection
site for recycling. If the new battery pack elicits the same
trouble indication as the original, have the charger and the
battery pack tested at an authorized service center.
NOTE: This could also mean a problem with a charger.
When the appliance is turned ON
When the appliance is turned on, indicators for the power
supply and the battery status are displayed on the lower right
portion of the LCD screen
Appliance is operating via the AC/DC
power adaptor
Battery level is low
Battery is partially charged
Battery is fully charged
Hot/Cold delay of charging
Problem with the battery pack or charger
OPERATION
This appliance is equipped with memory capacity in order to
store the selected radio channels and paired Bluetooth devices.
nOTE: The music mode will operate when connected with
the AC/DC power adaptor and/or when operated solely on
battery power.
nOTE: When the appliance is connected by the supplied power
supply unit to the outlet it will charge the installed battery.
Unplugged, the appliance can run up to 8 hours on a fully
charged battery using a premium 2A/h XR Li-ion battery. Using
batteries of lower voltage and amp hours will yield less run time.
This appliance can be operated in the vertical or
horizontal position.
nOTE: This product has two internal aerials that contribute to
its ruggedness by omitting an external aerial that can be bent
or broken. These aerials work together to provide 360 degree
radio reception without the need of extending and tuning
an extruding antenna as required by other radios. In order to
improve reception in very low signal areas we recommend
placing the ToughSystem Music in the vertical position so
the handle is facing upwards, or moving the radio closer to a
window or opening.
18
.
Button Functions (Fig. G)
The front panel includes a selection dial and mode buttons
20
Selection dial (the selection dial has more than one
function)
Power On/Off
Back button
Source selection button
Bluetooth button
Radio preset buttons
Powering ON and OFF (Fig. G, H)
Press the power button
to the last selected audio source.
Press the power button
turns off.

Volume Adjustment


WARNING: Excessive sound level can cause hearing loss.
nOTE: The volume is set and saved separately for each of the
audio source types.
20
Turn the dial clockwise to increase the volume. To decrease
the volume, turn counterclockwise.
Back Button ( )
After entering any one of the screens, press the back button
to return to the previous screen.
Audio Source Select (
To choose one of the audio sources (DAB+, FM, AUX or
Bluetooth) push the source selection button
desired source is found. For example, if the radio is on FM, seen
in upper left portion of LCD display, push the source button to
change to AUX
MAIN MENU (General Setup)
General Setup can be accessed from each of the selected audio
sources by:
1. Pressing the selection dial
2. Rotating the selection dial clockwise until Main Menu
is reached.
3. Pressing the selection dial to access the Main Menu.
From the main menu the following actions can be performed:
sound: tone adjust: Bass, Treble and Mid
-
Language: select the interface Language
-
Brightness: adjust the screen Brightness
-
Restore to default.
-
FM TUNER SETUP
The appliance can be tuned to DAB+ / FM radio frequencies
with the option of saving up to (6) DAB+ and (6) FM preset
stations. After setting and saving the preset stations, pressing a
preset button instantly changes the frequency to the
desired station.
for 1 second. The appliance turns on
for 3 seconds. The appliance
)
until the
20
.
EnGLIsh
21
.
33