HIKVISION DS-PD2-P18CE Manual De Instrucciones

1: Disassembling / Changing the Lens
DS-PD2-P18CE
18m Digital Curtain PIR Detector
EN50131-2-2:2008
EN50131-1:2006+A1:2009
Security Grade (SG) 2
Environmental Class (EC) II
This product and - if applicable - the supplied accessories too are
marked with "CE" and comply therefore with the applicable
2011/65/EU.
For electrical products sold within the European Community. At the
end of the electrical products life, it should not be disposed of with
your local Authority or retailer for recycling advice in your country.
The KX15DD Printed Circuit Board
D
®
The KX15DD Printed Circuit Board ®
D
®
15DD Casing ® 4: Bracket Connec Wall Brack 5: Installa
EOL Resist ance
Wall Brack Headers
C2 C3
EOL Resist ance
Headers
C AB L E E NT R Y C3
a) Ceiling Do not par
K NO C K O UT
Pyro Sensor
+ – ALA RM TAMPER LED
6K8 5K6
5K6 4K7
Bracket 4K7
Pyro Sensor 2K2
2k2 1K
1K
F
Avoiding False Alarms
Alarm LED
of the PCB
Alarm LED
1. Avoid placing the detector in direct sunlight.
LOW AU TO AU TO HI HIGH or LOW .
O F F O N (D efault)
2. Do not let pets and other animals wander freely T
please see the diagrams below
O F F O N (D efault)
whilst the alarm system is armed.
Ceiling Brack
Ceiling Brack 3. Do not mount the detector near heaters or
C5
radiators.
C5
LO W AU TO
+ – ALAR M T AMPER LE D
6K8 5K6
5K6 4K7
LO W AU TO AU TO H I 4K7 4. Do not mount the detector near open windows or 2K2
2k2
1K 1K
air vents as draughts may cause false alarms
b) Wall Bracket
5. Mount the detector on a stable surface.
This is the default
F
This is the default
LOW AU TO AU TO HI
6. Do not run cable parallel to mains wiring.
The W or The KX15DD (Examples using 4k7 for alarm, 4k7 for tamper)
or The KX15DD (Examples using 4k7 for alarm, 4k7 for tamper)
®
ormally Closed W iring Single End of Line W iring (SEOL)
ng Single End of Line W E2 iring (SEOL) Double End of Line W
Control Panel Control Panel
b) Single End of Line Wiring E2 E3
Control Panel
+AUX - Z 1 T T 5K6 6K8 +AUX - Z 1 T T
5K6
4K7
5K6 6K8 +AUX - Z 1 T 4K7 T 5K6
2K2
4K7 5K6 2K2 4K7
1K
4K7 1K
2K2 2K2 ALARM CONTROL PANEL
ALARM CONTROL PANEL
2K2
1K 1K
1K
The
+ – ALARM TAMPER LED + – ALARM TAMPER LED
8 5K6 6K8 + - 5K6
6 + - 5K6
connec 4K7 4K7
7 4K7
2K2 2K2
2 6 6K8 + – ALARM TAMPER LED 5K6 2K2
1K 1K
K 5K6 1K
7 shows the 4K7
2 4K7 2K2
2K2
1K
example value 1K
® ®
KX15DD KX15DD
4k7 for tamper
®
(EOL). ÒÅÕÍÈ×ÅÑÊÈÅ ÄÀÍÍÛÅ (ÊÐ KX15DD ÀÒÊÎ)
Zone Doubling Example (Matrix 424,832 or 832+)
Example (Matrix 424,832 or 832+)
A ÄÈ ÀÃÐÀÌ ÌÛ ÍÀ ÏÐ ÀÂ ËÅ ÍÍ ÎÑ ÒÈ Ç ÎÍ Û ÎÁ ÍÀ ÐÓÆ ÅÍ Èß
Ìîäå ëü: KX18DC ®
Control Panel
Öâå ò: Áå ëûé A 1 Î ÕÂÀÒ Ï Î ÃÎÐ ÈÇ ÎÍ ÒÀËÈ
6K8
E5
5K6 A 2 Î ÕÂÀÒ Ï Î ÂÅ ÐÒÈ ÊÀËÈ
Control Panel Êîðïóñ : 3ìì ABS ïëàñòèê, ëèíçà 0,4ìì 5K6 ÏÝÍÄ
6K8 4K7
Ìå òî ä îáíàðóæåíèÿ : Äâ óõïëîùàäíûé ïèðîý ëåêòð. ñåíñ îð 4K7 B ÂÅ Ñ È ÃÀÁ ÀÐ ÈÒ Û
+AUX - Z 1 T T
6K8 5K6
5K6
×óâñòâèò åëüíîñòü : 2K2 àâ òîìà òèóåñêî èëè âûîêî 2K2
C ÓÑÒÀÍ ÎÂ ÊÀ 5K6
5K6
4K7 4K7 1K
1K
+AUX - Z 1 Òåðìîêîìïåíñàöèÿ T T : Öèôðîâàÿ C 1 ÂÈ ÍÒ ÊÐ ÅÏ ËÅ ÍÈ ß Ë ÈÖ Å ÎÉ ×À ÑÒÈ 4K7
4K7
2K2 2K2
L ink 5K6
Äàëüíîñòü äåéñòâèÿ 18ì
2K2 C 2 ÂÛ ÁÈ ÂÍ ÛÅ ÎÒ ÂÅ ÐÑÒÈ ß 2K2
1K 1K
4K7
Çîíà îáíàðóæåíèÿ : 24 ðóáåæå é
1K C 3 ÌÎ ÍÒ ÀÆ ÍÀ ÑÒÅÍÓ 1K
2K2
Ñêîðîñòü îáíàðó æåíèÿ : 0,3 - 3 ,0 ì /ñ
C 4 ÑÁ ÎÐ ÊÀ ÍÀ ÑÒÅÍÍ ÎÃ Î Ê ÐÎÍ ØÒ ÅÉ ÍÀ ALARM + -
+ -
ALARM 1K TAMPER ALARM
Íàïðÿæåíèå ïèò àíèÿ : 9 - 16 Â ïîñò . òîêà 6K8
ALARM TAMPER LED C 5
6K8 +AUX - 5K6 ÑÁ ÎÐ ÊÀ ÏÎ ÒÎ ËÎ ×Í ÎÃ Î Ê ÐÎÍ ØÒ ÅÉ ÍÀ 6K8
+AUX -
Òîê ïî òðåáëåíèÿ: 11ìÀ @ 12  (ìèí. ), 1 2ìÀ @ 12  (ìàêñ. )
5K6
5K6 4K7 D ÂÍ ÓÒÐÅ ÍÍ ßß Ê ÎÌ ÏÎ ÍÎ ÂÊ À È ÇÂ ÅÙ ÀÒÅËß 5K6
Âûõî ä òðåâîãè : +AUX - 60 ïîñò . òîêà, 50 ìÀ (42 ,4 ïåðåì. òîêà ) 4K7
2K2
4K7 E ÏÅ ÐÅ ÌÛ ×Ê È Â ÛÁ ÎÐ À Í ÎÌ ÈÍ ÀËÀ Î ÊÎÍ Å× ÍÛ Õ 4K7
+ – ALARM TAMPER LED + – ALARM TAMPER LED 5K6
6K8 Âûñîò à óñòàíîâêè : 5K6 1.8 ì - 2.4 ì 6K8 ÐÅ ÇÈ ÑÒÎÐ ÎÂ 2K2
5K6 2K2 5K6 1K 4K7 2K2
4K7
Âûõî ä ñàìîîõðàíû : 12 50 ìÀ 4K7 2K2
4K7 2K2 E 1 ÊÎÐ ÎÒ ÊÎÇ ÀÌ ÊÍ ÓÒÛÉ Ø ËÅ ÉÔ (á åç î êîíå ÷í ûõ ðå çèñòîð îâ ) 1K
ED 1K + – ALARM TAMPER LED 1K
5K6 2K2 6K8 ® 5K6 2K2 1K
1K KX15DD
1K Òåìïåðà òóðà õðàíåíèÿ : 5K6 -40ºC to 80ºC (-40ºF to 176ºF) 4K7 1K
4K7 E 2 ØË ÅÉ Ô Ñ 1- Ì ÎÊ ÎÍ Å× ÍÛ Ì ÐÅ ÇÈ ÑÒÎÐ ÎÌ
2K2 4K7 2K2 ðåçèñòîð 4,7 êÎ ì)
Ðàáî ÷àÿ òåìïåðà òóðà: -30ºC to 70ºC (-22ºF to 158ºF)
® 2K2 1K
1K KX15DD
1K ØË ÅÉ Ô Ñ 2- Ìß ÎÊ ÎÍ Å× ÍÛ ÌÈ ÐÅ ÇÈ ÑÒÎÐ ÀÌ È ( íàï ðèìå ð,
Àêñåññóàðû : Íàñòåííûé è ïî òî ëî÷íûé êðîíøò åéí E 3 KX
äâ à ð åçèñòîðà ïî 4,7 êÎ ì)
Èçëó÷åíèå : EN55022 Class B
E 4 ÏÐ ÈÌ ÅÐ Ø ËÅ ÉÔ À Ñ ÓÄ ÎÅ ÍÈ ÅÌ ËÓ ×Å É
Ïîìå õî óñòîé÷èâîñòü: EN50130-4
E 5 Ä À È Ç ÅÙ ÀÒÅËß Â Î ÄÍ ÎÌ Ø ËÅ ÉÔ Å Ñ ÎÊ ÎÍ Å× Í. ÐÅ Ç.
11: The 18m Curtain Lens 12: The 30m Curtain Lens
18m Cur tain Lens 30m Long Range Lens
A
10 O
H O R IZ O NTAL C O V E R AG E
24 z ones
6 planes 18m
HO R IZ O NTAL C O V E R AG E
17m
16m
18m
17m 15m
16m 14m
15m
13m
14m
12m
13m
11m
12m
10m
11m
10m 9m
A1 9m
8m
8m
7m
7m
6m
HO R IZ O NTAL C O VE R AG E 6m
5m
5m
4m 4m
3m 3m
2m
2m
1m 1m
0m
0m
1m
1m
2m
2m
3m
4m 3m
5m
4m
1m 2m 3m 4m 5m 6m 7m 8m 9m 10m 11m 12m 13m 14m 15m 16m 17m 18m
6m
5m
7m
6m
A2
8m
7m
9m
10m 8m
VE R T IC AL C O VE R AG E 11m 9m
12m
4m 10m
13m 11m
14m
12m
15m
13m
16m
Link
17m 14m
18m
15m 5m 15m
1m 10m
16m
+ -
1m 2m 3m 4m 5m 6m 7m 8m 9m 10m 11m 12m 13m 14m 15m 16m 17m 18m 17m
- VE R T IC AL C O V E R AG E
18m
2.4m 1m 5m 10m
2.4m
V E R T IC AL C O V E R AG E
2.4m
1m 2m 3m 4m 5m 6m 7m 8m 9m 10m 11m 12m 13m 14m 15m 16m 17m 18m
+ -
ALARM
- ALARM
6K8 TAMPER
TAMPER
ALARM TAMPER LED 5K6
ALARM TAMPER LED
5K6 5K6
4K7
4K7
4K7
2K2
2K2 2K2
1K
1K
a) Printed Circuit Board
b) Light Pipe
e) PCB
Screw
f ) Back
Tamper
f ) Nut
d) Lens Collet
c) Lens
®
E EOL Resistor Headers
E EOL Resistor Headers
Hints 6: S ty S
S E NS IT IVIT Y S E T T ING S :
®
The KX15DD has two set s of header pins on the PCB, one on
either side of the connector blocks.
S E NS IT IVIT Y S E T T ING S :
®
Auto, High or L ow. The KX15DD has two set s of header pins on the PCB, one on
select the End Of Line resistance for EOL
a) Auto S ty (Default)
+ – ALA RM TAMPER LED either side of the connector blocks. These headers are used to
6K8 completely obscure the detector's 5K6 If EOL wiring is not used, leave the headers OFF
5K6 4K7
4K7 Auto, High or L ow. 2K2 ALARM CONTROL PANEL
select the End Of Line resistance for EOL
2k2 1K
1K S ee the diagams below
If EOL wiring is not used, leave the headers OFF .
The set to the lef t of the + terminal select s the value of the
S ee the diagams below resist ance across the ALARM relay . The set to the right of the
The set to the lef t of the + terminal select s the value of the
TAMPER terminals select s the value of the End Of Line resistor
+ -
resist ance across the ALARM relay . The set to the right of the + -
ALARM
6K8 ALARM TAMPER
TAMPER terminals select s the value of the End Of Line resistor
of the PCB If the resist ance value you require
5K6
is not select able, leave the
4K7
If the resist ance value you require AUT O, headers of f and wire a resistor
2K2
LOW AU TO AU TO HI HIGH or LOW . is not select able, leave the This symbol illustrates
of the required value between the
1K
AUT O,
headers of f and wire a resistor where the resistors are
appropriate terminals as shown.
T of the required value between the
connected internally
please see the diagrams below LOW AUTO appropriate terminals as shown. AUTO HI .
.
6K8 + – ALAR M T AMPER LE D
5K6 6K8 + – ALARM TAMPER LED 5K6
5K6 4K7 5K6 4K7
AU TO H I 4K7 2K2 4K7
2k2 1K LO W AU TO AU TO H I 2K2
1K 2k2 1K
1K
6K8 + – ALARM TAMPER LED 5K6
5K6
4K7 LED ON
LO W AU TO AU TO H I 4K7 2K2 LO W AU TO AU TO H I
2k2 1K ALARM + -
1K LED OFF
6K8
5K6
4K7
LOW AUTO AUTO HI
2K2
1K
LOW AU TO AU TO HI LOW AUTO AUTO HI
LOW AU TO AU TO HI
LOW AU TO AU TO HI
®
Double End of Line W iring (DEOL)
E3 iring (DEOL) Remote LED Enable ®
Control Panel
The KX15DD has a terminal marked 'LED'
c) Double End of Line Wiring
to enable the LED in walk test only on a alarm control panel.
Control Panel ®
The KX15DD has a terminal marked 'LED'
6K8
5K6 5K6
+AUX - Z 1 T T to enable the LED in walk test only on a alarm control panel.
This is used when the LED is disabled via the LED ON/OFF link.
5K6
4K7 4K7
6K8 4K7 5K6
+AUX - Z 1 T T
2K2 This is used when the LED is disabled via the LED ON/OFF link. 2K2
5K6 2K2 To enable this feature, the LED terminal needs to be connected
4K7
1K 1K
4K7 1K to an Output at the alarm control p anel. When the system is
2K2 ALARM CONTROL PANEL
2K2 ALARM CONTROL PANEL To enable this feature, the LED terminal needs to be connected
is in walk test mode the Output should be at 0V
1K
1K to an Output at the alarm control p anel. When the system is
is in walk test mode the Output should be at 0V ALARM CONTROL PANEL
The Output would be usually programmed as "Remote LED
The
enable".
+ – ALARM TAMPER LED
6K8 5K6 + -
The Output would be usually programmed as "Remote LED
+ - 5K6 connec
4K7
4K7
enable". 2K2
6K8 + – ALARM TAMPER LED 2K2 5K6
shows the 1K
5K6 1K + -
4K7
+ – ALARM TAMPER LED
4K7 2K2
2K2
1K example
1K
+ – ALARM TAMPER LED
values 4k7 for ®
KX15DD
K X 1 8 D C
® alarm, 4k7 for
KX15DD
Two DEOL Detectors T o One Input
®
T S 50131-2-2 tamper (EOL).
2 EN 50131-1 Two DEOL Detectors T o One Input
E5
PD 6662:2004 Control Panel
6K8
Security Grade 2 5K6
Env ironmental Class 2
18m Digital Cur Control Panel tain PIR Detector 5K6
4K7
6K8
5K6 +AUX - Z 1 Link T T 4K7
2K2
Sp ecificatio n s 6K8 5K6
2K2
4K7
5K6 +AUX - Z 1 T T 4K7 1K
2K2
6K8 L ink
4K7 2K2
®
5K6 Model: KX 18D C 1K
2K2 1K
L ink
4K7
C olour: White 1K
2K2
TAMPER ALARM + - TAMPER
+ - C as ing : 3mm AB S, 0 .4m m H DP E in Le ns are a
ALARM TAMPER LED TAMPER ALARM TAMPER LED
1K 5K6 6K8
ALARM TAMPER LED
L ens : Cu rtain Le ns 5K6 +AUX -
4K7
5K6 + -
4K7 ALARM
Detec tion Method: Low no ise dua l ele ment pyroele ctric s ens or
+AUX - ALARM TAMPER LED
2K2 +AUX - 4K7 6K8
2K2
+ – ALARM TAMPER LED
P IR S ens itivity: Auto o r H igh 6K8 5K6 6K8
1K 2K2
5K6 5K6
5K6 1K 4K7
Temperature C omp: Dig ital 4K7 2K2 4K7
+ – ALARM TAMPER LED 1K 4K7 + – ALARM TAMPER LED
6K8 5K6 2K2 6K8 5K6 2K2
1K ®
5K6 KX15DD
Detec tion R ang e: 5K6 18m 4K7 1K 2K2 4K7
(í àï ðèìå ð,
4K7 4K7 2K2
2K2
2K2 2K2
Detec tion Z ones : 24 1K 1K ® 1K
KX15DD 1K
1K
Detec tion S peed: KX 0.3 - 3 .0m /s
O perating Voltag e: 9 - 16V DC 13 .8V DC typica l
KX
C urrent C ons umption: 11mA @ 12 V ( Min), 1 2mA @ 12 V ( Max)
13: Dimensions and Weight
R elay O utput: SE LV li mits; 6 0V DC , 50 mA (42 .4V AC Pe ak)
T his product is approved for us e in the R es idential,
Mounting Heig ht: 1.8 - 4 m
C ommercial and L ight Indus trial E nvironment.
Tamper S witc h: 12V 50 mA
8 O
S torag e Temp: -40 C t o 8 0 C (-4 0 F to 176 F) T S 50131-2-2
46 z ones
EN 50131-1
90 O 2
6 planes O perating Temp: -30 C t o 7 0 C (-2 2 F to 158 F)
46 z ones PD 6662:2004
6 planes A c c es s ories : Wall & ce iling mo unting bra cke ts in cluded
Security Grade 2
Env ironmental Class 2
E mis s ions : EN 55 022 Cla ss B
This product complies with TS50131-2-2. at security grade 2,
Immunity: EN 50 130 -4
environmental class 2.
O ptional L ens es : 30m Lo ng Ra nge UK = Suitable for use with sy stems installed to PD6662:
EXPOR T = Suitable for use with systems inst alled to EN50131-1
ower Up ALARM CONTROL PANEL
ALARM CONTROL PANEL
Customer Support Line (UK only): 0870 122 3360
When the detector is first powered up, it will run through a This rate line
Hours of business: 7.00am - 7.30pm
+ -
+ - E-mail: customer .support@pyronix.com
Avoiding F alse Alarms website: www .pyronix.com
Pyronix Limited, Pyronix House, Braithwell W
1. Avoid placing the detector in direct sunlight.
Hellaby , Rotherham, S66 8QY
2. Do not let pet s and other animals wander freely whilst the
B Dimensions
117 x 69 x 50mm
alarm system is armed.
3. Do not mount the detector near heaters or radiators.
3mm
4. Do not mount the detector near open windows or air vents (0.12")
125g (4.4 oz)
as draughts may cause false alarms.
Link
5. Mount the detector on a st able surface. without bracket
25m
20m 30m + - + -
6. Do not run cable p arallel to mains wiring. + -
15m 20m 25m 30m WA R R A NT Y
T his product is s old s ubject to our s tandard
30m
warranty conditions and is warranted agains t defects in
69mm 50mm
workmans hip for a period of five years .
(2.72") (2.2")
ALARM + - TAMPER ALARM + -
+ -
TAMPER In the interes t of continuing improvement of quality, 30m ALARM ALARM TAMPER LED TAMPER
6K8 5K6 6K8
TAMPER LED 5K6 ALARM TAMPER LED 5K6
cus tomer care and des ign, P yronix L td res erves the right 6K8 Kg = 125g (4.4 oz ) without bracket
to amend s pecifications , without giving prior notice. 4K7
5K6 5K6
4K7 5K6 4K7
4K7 2K2 4K7 Hangzhou Hikvision Digital Technology CO.,Ltd.
2K2 2K2
4K7
2K2 1K 2K2
1K 2K2 1K
1K 1K
2: The Printed Circuit Board
a) Alarm Resistor
Headers
d) Tamper Spring
e) Alarm LED
ON/OFF
LED ON
LED OFF
f ) S ty g) Piro Sensor
S DO NOT TOUCH
Auto or High
g) Casing Screw Please note the LOW/AUTO link is inac ve
These headers are used to
b) High S ty
.
ALARM CONTROL PANEL
.
+ -
+ -
TAMPER ALARM TAMPER
LED 5K6 6K8 ALARM TAMPER LED 5K6
.
4K7 5K6 4K7
This symbol illustrates
2K2 4K7 2K2
where the resistors are
1K 2K2 1K
connected internally 1K
LOW AUTO AUTO HI
ALARM + - TAMPER
ALARM TAMPER LED
5K6
6K8 6K8
4K7
5K6 5K6
2K2
4K7 4K7
6K8 + – ALARM TAMPER LED 5K6
5K6 4K7
4K7
LO W AU TO AU TO H I 2K2
2k2 1K 1K
2K2 1K 2K2
6K8 + – ALARM TAMPER LED 5K6
5K6
4K7 LED ON
4K7 2K2
2k2 1K 1K TAMPER ALARM + - 1K TAMPER
1K LED OFF
ALARM TAMPER LED ALARM TAMPER LED
5K6
6K8
4K7
5K6
2K2 4K7
1K LOW AUTO AUTO HI
2K2
1K
LOW AUTO AUTO HI
LOW AU TO AU TO HI
LOW AU TO AU TO HI
KX KX
Remote LED Enable
which can be used
which can be used
LED ON
LED OFF
.
.
Control Panel
LOW AUTO Output AUTO HI
Control Panel
(0v in Walk Test)
Output
(0v in Walk Test)
5K6
1K + - 4K7
5K6
2K2
4K7
1K
2K2
1K
5K6
+AUX -
4K7
+ -
TAMPER ALARM TAMPER
ALARM TAMPER LED
2K2 5K6 6K8 5K6
+ – ALARM TAMPER LED
5K6
1K 4K7 4K7
5K6 4K7
2K2 2K2 2K2
4K7
1K
1K
1K 2K2 1K
1K
R INS 1038-3
KX
R INS 1038-3
Op cal and Range Features Electrical
Hangzhou Hikvision Digital Technology CO.,Ltd.
Coverage 10 , 24 zones, and
Power Supply
(Default) 6 planes
Current
Maximum Range 18m or 30m
Current
Op mal Installa on Height 2.4-4m
Relay Type
Creep- Yes
Outputs Relay
2004 (AMD)
Key Features
Tamper Terminal
Blue Wave Technology Yes
Alarm Response
Automa c Yes
Detec on Speed
Digital Yes
Op cs
Op cal Quad Yes
Geometric
DEOL Resistors on Board Yes
ay, Other Details
Tamper Yes
. UK
Opera ng
Accessories
Weight
Ceiling Bracket Included Yes
Dimensions
Wall bracket included Yes
117mm
(4.61")
!
The Input voltage should meet both the SELV (Safety Extra Low Voltage) and
the Limited Power Source according to the IEC60950-1 standard. Please refer
to technical speci cations for detailed information.
TAMPER
ALARM TAMPER LED
5K6
4K7
R INS 1040-2
2K2 No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China
1K
3: Cable Entry + Moun
a) Moun Screw
b) Terminals
Knockouts
c) Tamper Resistor
Headers
c) Case Lid Screw
F
7: EOL Resistor Headers 8: Remote LED Enable
The detector has a terminal marked 'LED' which can
The detector has 2 set of header pins at the top of
ALARM CONTROL PANEL
be used to enable the LED in walk test only on an
the printed circuit board. These headers are used
ALARM Control Panel Output
alarm control panel. This is used when the LED is
(0v in walk test)
to select the End of Line resistance for EOL wiring
+ -
CONTROL disabled via the LED ON/OFF link . To enable this
applica s.
feature, the LED terminal needs to be connected to
PANEL
an output on the control panel. When the system is
If EOL wiring is not used, leave the headers OFF.
in walk test mode the output should be at 0v.
The output would be usually programmed as
'Remote LED enable'
ALARM + - TAMPER
ALARM TAMPER LED
5K6
6K8
ALARM + - TAMPER
5K6 4K7
ALARM TAMPER LED
5K6
2K2
4K7
4K7 1K
2K2
1K
2K2
1K
ALARM + - TAMPER
ALARM TAMPER LED
5K6 5K6
6K8
4K7 4K7
5K6
2K2 4K7 2K2
ALARM
1K 1K
2K2 6K8
1K 5K6
4K7
2K2
KX 1K
d) Two Double End of Line Detectors to One Input
LED ON
LED OFF
ALARM CONTROL PANEL
The connec
+ -
example values 4k7 for alarm,
4k7 for tamper (EOL).
LOW AUTO AUTO HI
Link
+ - + -
ALARM + - TAMPER ALARM + -
ALARM TAMPER LED ALARM TAMPER
6K8 5K6 6K8
4K7
5K6 5K6
4K7 2K2 4K7
1K
2K2 2K2
1K 1K
15:
No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China
User Manual
9-16 DC (12DC nominal)
COPYRIGHT ©2018 Hangzhou Hikvision Digital Technology Co., Ltd.
11mA
ALL RIGHTS RESERVED.
13mA
Solid state
60VDC, 50mA protec on
12VDC max, 50mA max
2.5 s
0.3 to 3m/s
Sealed op cs
3D
Manual.
About this Manual
-10 ° C t o + 4 0 ° C This manual is applicable to detector.
125g without bracket
117 × 69 × 50 mm
or other reasons. Please find the latest version in the company website
Please use this user manual under the guidance of professionals.
Trademarks Acknowledgement
and other Hikvision's trademarks and logos are the
b) Cable Entry
Knockout
9: Choose the Connec
a) Normally Closed
ALARM CONTROL PANEL
+ -
Control Panel Output
ALARM
(0v in walk test)
CONTROL
PANEL
+ -
ALARM
+ - TAMPER ALARM TAMPER
6K8
ALARM TAMPER LED
5K6
5K6
4K7
4K7
2K2
2K2
1K
1K
10: Powering Up
BLUE LED. Onc
is ready to use.
ows the
ALARM CONTROL PANEL

NOT READY
+ -
Link
TAMPER
LED
5K6
4K7
2K2
1K ALARM + - TAMPER
ALARM TAMPER LED 5K6
6K8
5K6 4K7
4K7 2K2
1K
2K2
1K
KX
party responsible for compliance could void the user's authority to operate the
equipment.
FCC compliance: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These
frequency energy and, if not installed and used in accordance with the
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that
Type
TAMPER
LED
5K6
4K7
2K2
1K
tector

READY
+ -
ALARM + -
ALARM TAMPER
6K8
5K6
4K7
2K2
1K
KX