Wall Mounting - Newskill ICARUS 27 Manual Del Usuario

4. Wall Mounting

Open the package, take out the product with foam still attached, and gently place it on a desktop or
1
table. Remove the extra parts and the foam covering the back of the monitor. Press the release button to
remove the stand plate.If the monitor was already attached to the stand, remove the stand.
Remove the original screws (
2
Then use the 4pcs PM4*16 screws to attach the adapters inside the opening.
• Do not discard the original screws.
• Use only the 4pcs PM4*16 screws (
1
3 Your monitor is now ready to be attached to a wall-mounting bracket.
To avoid damage, please do not pinch the screen during bracket installation.
Mount
(Not included)
This monitor only includes screws which may be used when
attaching the monitor to a VESA 75*75mm type mount.
No VESA mount or mounting accessory is included.
Release button
Foam
) from the opening in the back of the monitor.
1
) provided.You MUST follow the instructions below for secure installation.
2
Screw x 4
ICARUS SERIES
Stand Plate
2
9
EN