Publicidad
CONTROLS & FUNCTIONS
1. DJ MIC INPUT (FRONT)
Balanced XLR microphone connection.
2. GAIN CONTROL
Adjust the input level for each channel (0dB to
+10dB).
3. AUX 3.5MM JACK CONNECTION
3.5mm Jack aux input for Line devices (RCA
Phono connector).
4. MIC EQ
High and Low EQ for DJ Mic, Mic 1 and Mic 2.
5. MIC 1/2 LEVELS
Volume control for Mic1 and Mic 2.
6. CHANNEL 1 SOURCE SELECTOR
PH1-LN1/ LN2 Select between Phono/Line 1
(41) or Line 2 (40) channel sources.
7. CHANNEL 2 SOURCE SELECTOR
PH2 / AUX / LN3 select between Phono 2 (39),
AUX (3), or Line 3 (38) channel sources.
8. TALK OVER SWITCH
Turns Talk-Over function on or off (lowers main
volume when a microphone signal is detected).
9. CUE/PGM HEADPHONE MIX
Mix between selected cued channels and main
output.
10. CUE TO MONO
Converts the cued channels to MONO on the
headphones output (i.e. for single headphone
use).
11. HEADPHONE LEVEL
Volume control for headphones.
12. ON/OFF SWITCH
Turn the mixer on or off.
13. CHANNEL VU METER 10 LED
Display showing output level for each channel.
14. MASTER VU METER 10 LED
Display showing output level for the master
channel.
15. CHANNEL EQ
Adjust the High, Mid or Low EQ for each
channel (-15dB to +15dB).
16. MASTER TO MONO
Converts the master output to a MONO signal
when pressed.
17. MASTER L/R BALANCE
Pan the master output left or right.
18. CHANNEL 4 SOURCE SELECTOR
LN5 / DJ MIC select between Line 5 (35) or DJ
Mic (1) channel sources.
19. CHANNEL 3 SOURCE SELECTOR
PH3 / USB/ LN4 Select between Phono 3 (37),
USB (43) or Line 4 (36) channel sources.
20. MASTER LEVEL FADER
Volume control for master output.
21. CHANNEL LEVEL FADERS
Adjust the volume for each channel (to be used
as desired once gain levels have been set).
22. CUE BUTTON
Select which channel(s) are heard through the
headphone output (27).
23. BOOTH LEVEL DIAL
Volume control for Booth output (for
monitoring purposes).
24. XF ASSIGN LEFT
Assign which channels the cross fader is fading
to on the left side.
25. CROSS FADER
Fades between the selected channels. When
pushed far left/right, 100% of the signal from
the channel assigned by the XF assign knobs
(24/26) will be present.
26. XF ASSIGN RIGHT
Assign which channels the cross fader is fading
between on the right side.
27. HEADPHONE OUTPUT
6.3mm (1/4") TRS connection for headphones.
28. AC POWER CONNECTION
Connection for supplied AC power cable.
7
Publicidad
