Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
•
Prevent exposure and breathing of harmful dust and
particles created by power tool use.
Some dust created by power sanding, sawing, grinding,
drilling, and other construction activities contains
chemicals known to cause cancer, birth defects or other
reproductive harm. Some examples of these chemicals
are:
- lead from lead based paints,
- crystalline silica from bricks and cement and other
masonry products, and
- arsenic and chromium from chemically treated
lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to filter
out microscopic particles.
•
Power tools can vibrate in use. Vibration, repetitive motions
or uncomfortable positions may be harmful to your hands
and arms. Stop using any tool if discomfort, tingling feeling
or pain occurs. Seek medical advice before resuming use.
•
Keep body stance balanced and firm. Do not overreach
when operating this tool. Anticipate and be alert for sudden
changes in motion, reaction torques, or forces during start
up and operation.
The use of other than genuine Ingersoll-Rand replacement parts may result in safety hazards, decreased tool performance, and
increased maintenance, and may invalidate all warranties.
Repairs should be made only by authorized trained personnel. Consult your nearest Ingersoll-Rand Authorized Servicenter.
WARNING
Always wear eye protection
when operating or performing
maintenance on this tool.
Ingersoll-Rand No. 50
After each 20 000 cycles, or as experience indicates, drain
and refill the Impulse Unit Drive Assembly as instructed
in this manual using the Fluid Replacement Kit (Part
No. EQ106S-K400). Lubricate the hex drive and the output
shaft before assembly.
Using the Tool (Continued)
WARNING SYMBOL IDENTIFICATION
Read this manual before
operating tool.
LUBRICATION
Ingersoll-Rand No. 68
Ingersoll-Rand Fluid Part
No. EQ106S-400-1
•
Tool and/or accessories may briefly continue their motion
after throttle is released.
•
To avoid accidental starting - ensure tool is in "off" position
before applying air pressure, avoid throttle when carrying,
and release throttle with loss of air.
•
Ensure work pieces are secure. Use clamps or vises to hold
work piece whenever possible.
•
Do not carry or drag the tool by the hose.
•
Do not use power tools when tired, or under the influence
of medication, drugs, or alcohol.
•
Never use a damaged or malfunctioning tool or accessory.
•
Do not modify the tool, safety devices, or accessories.
•
Do not use this product for purposes other than those
recommended.
•
Use accessories recommended by Ingersoll-Rand.
•
For reversible models, note the position of the reversing
mechanism before operating the tool so as to be aware of
the direction of rotation when operating the throttle.
•
Use only impact sockets and accessories. Do not use hand
(chrome) sockets or accessories.
•
Periodically check the drive end of the tool to make certain
that the socket retainer functions correctly, and that sockets
and drive ends are not excessively worn which may allow
the socket to come off when rotating.
WARNING
Main Line(s) Inner Ø
to be 3X Size of
Air Tool's Inlet Ø
To Air
System
To Air
Tool
Emergency
L
Shut-Off
Valve
Lubricator
Regulator
Drain Regularly
2
WARNING
Always wear hearing
protection when operating
this tool.
Branch Line(s) Inner Ø
to be 2X Size of
Air Tool's Inlet Ø
R
F
Filter
FRL
Compressor
(Dwg. TPD905-2)
Publicidad
Tabla de contenido
