Setting The Power Regulator - Ingersoll Rand LA158 Manual De Instrucciones

Ingersoll- - Rand No. 50
Always use of an air line lubricator with these tools.
We recommend the following Filter- - Regulator- - Lubricator
(FRL) Unit:
For International- - No. C28- - C4- - FKG0
For U.S.A. - - No. C28- - 04- - FKG0- - 28
After each 48 hours of operation, or as experience
indicates, remove the Oil Plug Screw (3) and check oil
level in the impact mechanism. If oil level is low, drain
old oil and add 1- - 3/8 oz (40 cc) of Ingersoll- - Rand No. 50
Oil to the impact mechanism. Replace Oil Plug and
tighten securely.
Model Type of Drive
Handle
in.
LA158 pistol 3/8" sq.
Tested in accordance with PNEUROP PN8NTC1.2
H
♦ Tested to ISO8662- -7
ISO3744
•

Setting the Power Regulator

Model LA158 Impact Wrench incorporates a power
regulator (43). To set tool to full power, turn the knob
counterclockwise until knob stops. To reduce power, turn
the knob clockwise until desired power is reached.
LUBRICATION
SPECIFICATIONS
Impacts Recommended
per Torque Range
min.
ft- - lbs (Nm) Pressure
1,400 5- - 75 (6.8- - 100)
ADJUSTMENTS
Main Line(s) Inner Ø
to be 3X Size of
Air Tool's Inlet Ø
To Air
System
To Air
Tool
L
Emergency
Shut--Off
Valve
Lubricator Regulator
FRL
Drain Regularly
HSound Level
♦Vibration
dB (A) Level
2
m/s
•Power
91.4 104.4 1.9
3
Branch Line(s) Inner Ø
to be 2X Size of
Air Tool's Inlet Ø
R
F
Filter
Compressor
(Dwg. TPD905- -2)
Inlet Minimum
Connections
Inside Ø
Air Hose
Thread in. (mm)
Type
1/4" NPT 5/16" (8)