Accessories And Spare Parts; Scope Of Delivery; Symbols On The Device; Description Of The Device - Kärcher LTR 36-33 Battery Manual De Instrucciones

ment. However, these components are required for the
correct operation of the appliance. Appliances marked
by this symbol are not allowed to be disposed of togeth-
er with the household rubbish.
Notes on the content materials (REACH)
Current information on content materials can be found
at: www.kaercher.com/REACH

Accessories and spare parts

Only use original accessories and original spare parts.
They ensure that the appliance will run fault-free and
safely.
Information on accessories and spare parts can be
found at www.kaercher.com.

Scope of delivery

The scope of delivery for the appliance is shown on the
packaging. Check the contents for completeness when
unpacking. If any accessories are missing or in the
event of any shipping damage, please notify your deal-
er.

Symbols on the device

Follow all warning notices and safety instruc-
tions. Read and comprehend all instructions
before using the product.
Always wear suitable eye protection and
hearing protection when working with the de-
vice.
Do not subject the device to rain or moist
conditions.
Do not use saw blades or metal blades.
Danger due to flung objects. Keep a safe dis-
tance away.
Hand injuries from sharp cutting tool.
Pull: Quick release tab for carrying belt

Description of the device

The maximum amount of equipment is described in
these operating instructions. Depending on the model
used, there are differences in the scope of delivery (see
packaging).
For the illustrations, refer to the graphics page
Illustration A
Power switch with variable speed control
1
Rear handle
2
Unlocking button
3
14
Front handle
4
Upper shaft
5
Shaft coupling
6
Lower shaft
7
Motor casing
8
Switch for adjusting the working width
9
String guard
10
Cutting blade
11
Plant guard bracket
12
Cutting string
13
*Rechargeable battery pack
14
*Charger
15
Reel cover
16
Reel cover release
17
Cutting tool
18
a) String reel
b) Trimmer blade
Eye
19
Button for releasing the string
20
Type plate
21
Carrying belt (2.445-242.0)
22
* optional
Rechargeable battery pack
The device can be operated with a Kärcher 36 V Bat-
tery Power battery pack.
Installing the string guard
WARNING
Blade on the string guard
Incision injuries
Install the string guard before using the device for the
first time.
WARNING
Exposed string
Incision injuries
Never use the device without the string guard.
Illustration B
The string guard must face the operator.
1. Insert the string guard into the bracket.
2. Screw the string guard to the bracket.
Installing the plant guard bracket
1. Install the plant guard bracket.
Illustration C
1. Connect the upper and lower shaft segments.
Illustration D
Installing the front handle
1. Screw the front handle to the upper shaft section at
the desired height.
Illustration E
English

Installation

Installing shaft