Initial Setup; Standby Operation; Bluetooth Operation - Crosley CR3110A Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

English

Initial Setup

Essential Setup
1. Place the unit on a flat and level surface. The selected location should be
stable and free from vibration.
2. Connect the Power plug to the Power Jack of the unit.

Standby Operation

To put the unit in Standby Mode, long press the Mode Button. To exit Standby
Mode, press the Mode Button again. The unit will automatically go to Bluetooth
Mode once out of Standby Mode.
Note: The Standby Indicator will be red while in Standby Mode.

Bluetooth Operation

1. Press the Mode Button to select the Bluetooth mode, you will hear an
activation sound from the unit.
Note: The Bluetooth Indicator will be blue.
2. Turn on the Bluetooth feature of your audio device, search for "CROSLEY
CR3110A" and pair.
3. Once your device is successfully paired with the unit, you will hear a short
confirmation sound from the unit.
4. Play and stream music from your device to the unit.
5. During playback, press the Play/Pause Button to suspend and resume song.
6. During playback, short press the Forward & Backward Skip button to go to the
next song. Long press the Forward & Backward Skip button to go to the
previous song.
Note: Bluetooth version - *2.1*
Aux Input Connection
You can connect an audio device to this unit and play your music through its
speakers. To do this, press the Mode Button to Aux-In Mode (The Aux Indicator
will be green), connect a 3.5 mm auxiliary cable (Not Included) between your
audio device to the Aux In Jack of this unit and start playing the music.
5

Publicidad

Tabla de contenido
loading

Tabla de contenido