Residual Risks - Stanley FATMAX SFMCHT855 Traducido De Las Instrucciones Originales

English
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
e ) Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool's
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
f ) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
g ) Use the power tool, accessories and tool bits etc.,
in accordance with these instructions taking into
account the working conditions and the work to be
performed. Use of the power tool for operations different
from those intended could result in a hazardous situation.
5) Battery tool use and care
a ) Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with
another battery pack.
b ) Use power tools only with specifically designated
battery packs. Use of any other battery packs may create
a risk of injury and fire.
c ) When battery pack is not in use, keep it away from
other metal objects like paper clips, coins, keys,
nails, screws or other small metal objects that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause burns
or a fire.
d ) Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help. Liquid
ejected from the battery may cause irritation or burns.
6) Service
a ) Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
Additional Safety Instructions for
Hedge Trimmers

WARNING: Cutting elements continue to rotate after the
motor is switched off.
•
Keep all parts of the body away from the cutter blade.
Do not remove cut material or hold material to be cut
when blades are moving. Make sure the switch is off
when clearing jammed material. A moment of inattention
while operating the tool can result in serious personal injury.
•
Carry the hedge trimmer by the handle with the cutter
blade stopped. When transporting or storing the hedge
trimmer always fit the cutting device cover. Proper handling
of the hedge trimmer will reduce possible personal injury from the
cutter blades.
6
•
Hold the power tool by insulated gripping surfaces only,
because the cutter blade may contact hidden wiring.
Cutter blades contacting a "live" wire may make exposed metal
parts of the power tool "live" and could give the operator an
electric shock.
• The intended use is described in this instruction manual. The
use of any accessory or attachment or performance of any
operation with this tool other than those recommended in this
instruction manual can present a risk of personal injury and/or
damage to property.
• Do not carry the tool with your hands on the front
handle, switch or the trigger switch unless the battery has
been removed.
• If you have not used a hedge trimmer before, preferably seek
practical instruction by an experienced user in addition to
studying this manual.
• Never touch the blades while the tool is running.
• Never attempt to force the blades to come to a standstill. u
Do not put the tool down until the blades have come to a
complete standstill.
• Regularly check the blades for damage and wear. Do not use
the tool when the blades are damaged.
• Take care to avoid hard objects (e.g. metal wire, railings)
when trimming. Should you accidentally hit any such object,
immediately switch the tool off and check for any damage.
• Should the tool start to vibrate abnormally, immediately switch it off
and remove the battery then check for any damage.
• If the tool stalls, immediately switch it off. Remove the battery
before attempting to remove any obstructions.
• After use, place the blade sheath supplied over the blades. Store
the tool, making sure that the blade is not exposed.
• Always ensure that all guards are fitted when using the
tool. Never attempt to use an incomplete tool or a tool with
unauthorised modifications.
• Never allow children to use the tool.
• Be aware of falling debris when cutting the higher sides of
a hedge.
• Always hold the tool with both hands and by the
handles provided.

Residual Risks

Additional residual risks may arise when using the tool which
may not be included in the enclosed safety warnings. These risks
can arise from misuse, prolonged use etc.
Even with the application of the relevant safety regulations and
the implementation of safety devices, certain residual risks can
not be avoided. These include:
• Injuries caused by touching any rotating/moving parts.
• Injuries caused when changing any parts, blades
or accessories.
• Injuries caused by prolonged use of a tool. When using any
tool for prolonged periods ensure you take regular breaks.
• Impairment of hearing.