Protecting The Environment; Ec Declaration Of Conformity - Black and Decker BDCSP18 Manual De Instrucciones

Problem Possible Solution
Unit will not Circuit fuse is blown
power on
Circuit breaker is tripped
Battery is not charged
Battery is not fully
connected
Battery does not have
enough power
Battery has been removed
Bluetooth® Device roamed out of
disconnected range
Maintenance
Your BLACK+DECKER corded/cordless appliance/tool has
been designed to operate over a long period of time with a
minimum of maintenance. Continuous satisfactory operation
depends upon proper tool/appliance care and regular
cleaning.
Warning! Switch off and unplug the appliance before carrying
out any cleaning.
Dirt and grease may be removed from the exterior of the
u
appliance using a cloth.
Warning! NEVER use solvents or other harsh chemicals
for cleaning the non-metallic parts of the appliance. These
chemicals may weaken the materials used in these parts. Use
a cloth dampened only with water and mild soap. Never let
any liquid get inside the unit; never immerse any part of the
unit into a liquid.
Warning! NEVER spray or in any other way apply lubricants
or cleaning solvents inside the tool. This can seriously affect
the life and performance of the tool.
Service Notes
This product is not user serviceable. There are no user
serviceable parts inside the radio. Servicing at an authorized
service center is required to avoid damage to static sensitive
internal components.
Possible Cause
Replace circuit fuse (if the product
repeatedly causes the circuit fuse
to blow, discontinue use
immediately and have it serviced
at a BLACK+DECKER service
centre or authorised servicer)
Reset circuit breaker (if the product
repeatedly causes the circuit breaker
to trip, discontinue use immediately
and have it serviced at a
BLACK+DECKER service centre or
authorised servicer)
Charge battery
Push battery fully into the battery port
and ensure it is properly connected
Charge battery
Replace battery
Bring device into range of radio
Device may need to be paired to the
radio again, see "Using Bluetooth
Wireless Technology"
If two or more devices are paired to
speaker, disconnect the speaker in
the settings of the one of the devices.
(Original instructions)

Protecting the environment

Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be recov-
ered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com.

EC declaration of conformity

%
RADIO EQUIPMENT DIRECTIVE
BDCSP18 - Bluetooth speaker
Black & Decker declares that these products described under
"technical data" are in compliance with:
EN 300 328 V2.1.1, EN 301 489 V2.2.0,
EN 301 489-17 V3.2.0
These products also comply with Directive
2014/53/EU, 2014/35/EU, 2014/30/EU and 2011/65/EU.
For more information, please contact Black & Decker at the
following address or refer to the back of the manual.
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of
Black & Decker.
Black & Decker Europe, 210 Bath Road, Slough,
Guarantee
StanleyEurope is confident of the quality of its products and
offers consumers a 12 month guarantee from the date
of purchase. This guarantee is in addition to and in no way
prejudices your statutory rights. The guarantee is valid within
the territories of the Member States of the European Union
and the European Free Trade Area.
ENGLISH
Ray Laverick
Director of Engineering
Berkshire, SL1 3YD
United Kingdom
25/07/2018
5