Operating Instruction; Toast - Kenmore toast n wave Guía De Uso Y Cuidado

OPERATING INSTRUCTION

• Make sure the crumb tray is pushed all the way in place before plugging toaster into wall outlet.
• Remove all protective wrappings from food before placing into toasting slots. Place bread into slots and Close
the door. Then select one mode (Toast/Bagel) and press the Darkness Control to the desired setting (experi-
ment to suit individual taste). When you press the Start button, the heating element will turn on.
• Centering guides will automatically center the food for even browning. However, uneven browning may occur
if you are only using one toasting slot. If you operate toaster several times
using one slot continuously, the toaster's internal temperature will be hot and may
cause "Hot" to appear in the display. This will go away after several minutes after
the toaster cools down.
• Do not adjust the Darkness Control while the toaster is in use. To interrupt the
toasting cycle, press the "stop/clear" control button.
• During the toasting cycle, the indicator light wil be illuminated. If you open the door,
toasting will stop and the light will blink. The toasting cycle can be resumed by
closing the toaster door and pressing the start button.
• When the beep sounds, take out food carefully not to touch toaster's hot surface.
NOTE: After use of toaster, fan will run for 1 minute to cool.
Toast/Bagel Darkness Settings
Degree of darkness
Light
Medium
Dark
NOTE : For English Muffins, use bagel settings.

Toast

This toaster automatically determines required cooking times for toasting
Example : To toast bread at level 3.
Touch:
1.
2.
Twice
3.
4.
USING YOUR TOASTER
Display Shows:
Time of day
5
Toast Toaster
3
Toast Toaster
Starts toasting.
19
Select darkness level
1~3
4~6
7~9
Indicator light
ge darker
6
7 8
9 0
frozen
lighter
start / clear
off
off
on