Publicidad
ADDING MOTION SENSOR TO
YOUR SYSTEM
Note:
Make sure you've completed the setup of your eufy Security HomeBase.
Follow the onscreen instructions on the Eufy Security app to add your motion sensor.
1. Choose Add Device, then select Motion Sensor to add it to your system.
2. Press and hold the SYNC button for 2 seconds until the LED indicator blinks
blue. The Motion Sensor is waiting to pair.
03 English
3. The LED indicator turns solid blue to indicate the pairing is successful.
LED Status
Description
Blinking blue continuously
Waiting to connect
Solid blue for 5s
Paired successfully
Off
Failed to connect to the HomeBase
Note: The LED indicator, device name and timer can be customized on the eufy
Security app.
MOUNTING THE MOTION
SENSOR
Find a Location for Mounting
The motion sensor can be installed on a wall. To get optimal detection coverage,
consider the following factors before mounting the motion sensor:
•
Determine the area of detection and ensure there is an unobstructed field of
view
•
Determine the height and tilt angle
•
Avoid direct sources of heat or sunshine, curtains, plants, or pets.
Ideally, the motion sensor should be installed on a wall facing the door through which
people are likely to enter. We recommend placing the motion sensor close to a
corner to get the optimal detection coverage.
English 04
Publicidad
