easyGO Optimo Instrucciones De Uso página 11

In order to assembly the seat, unstick the seat
adapters from the handle on the stroller frame (fig.
11). The seat can be assembly both facing and
back to the direction of travel (fig. 12).
NOTE! Before using, make sure that the seat is
properly assembled.
NOTE! Never move the stroller by holding the seat.
In order to remove the seat, push the buttons
located on both sides of its adapters and pull the
seat up (Fig. 13).
ASSEMBLY AND REMOVING THE CANOPY
In order to assembly the canopy, insert its hooks
on the handles on the stroller frame (fig. 14). Set
the canopy in the desired position.
The canopy is equipped with additional part with
ventilation grid. In order to reveal it, unzip the top
of the canopy.
In order to remove the canopy, press the buttons
located at the hooks and slide it out of the holders
(fig. 15).
ASSEMBLY AND REMOVING THE BAR
In order to assembly the bar, insert its hooks on the
handles on the seat side tubes (fig. 16). In order
to remove it, push the buttons located in the lower
part of the handles and slide the clips out (fig. 17).
There is no need to remove the bar before folding
the stroller.
NOTE! Never move the stroller by holding the bar.
NOTE! Using the bar does not exempt from the
obligation to use the seat belts.
FOOT REST ADJUSTMENT
In order to lower the foot rest, press the round
EN
buttons on its sides (fig. 18). In order to raise the
foot rest, just push it upwards.
NOTE! The foot rest is to support the legs of a
child. If a child is in a sitting position, the foot rest
must be lowered.
BACKREST ADJUSTMENT
The stroller has 4-step adjustment of the backrest.
In order to lower the backrest, pull the lever on the
rear of the backrest and set the desired position
(fig. 19). In order to raise the backrest, just push it
upward. It locks automatically in that position.
GUIDERAIL ADJUSTMENT
The guiderail is adjustable in height. In order to set
it to the desired position, press the round button at
the base of the guiderail (fig. 20).
PRAM FOLDING
Before folding the pram, remove the child seat or
the carrycot.
To fold the pram frame, push the button on the
upper part of the guide on the right side (fig. 21a),
then pull up the levers on both sides of the guide
(fig. 21b) and push them down until total folding
(fig. 22, 23).
STROLLER BODY UNFOLDING AND
ASSEMBLY (optional)
In order to unfold the stroller body, pull the metal
tensioners so that they are locked in the plastic
hooks (fig. 24). For ease, you can use the strips
sewn into the tensioners.
Attach the bedding and the back of the canopy to
the edges of the body with the zip. (fig. 25). Then,
attach the upholstered canopy to the carrying
handle with the zip. In order to unfold the canopy,
11
set the carrying handle (which is also the canopy
rant) in a vertical position. In order to fold the
canopy, press the buttons located at the base of
the carrying handle (fig. 26).
In order to assembly the stroller body, stick its
adapters into the handles on the stroller frame (fig.
27). In order to remove it, press the buttons located
on its adapters and push upwards (fig. 28).
The stroller body can be re-assembled. To do this,
release the tensioners with the straps (fig. 29).
CHILD SEAT ASSEMBLY 0+
(Additional option)
To assembly the child seat of group 0+ on the
frame of Soul pram, use the adapters intended for
this model (additional option). The adapters are
designed to the child seat 0+ by EASYGO brand
and to the selected child seats of other brands (ask
the seller for the list of child seats of other brands).
Connect the adapters in the holes on the root of
the carrying handle, and then connect the child
seat with the adapters in the handles on the pram
frame (fig. 30).
To disassembly the child seat with the adapters,
pull up the round buttons on the adapters (fig. 31).