Reset Part Total; Total Reset - RDS Technology UK330-1 Manual De Instrucciones

Silacount 200 Bale Wrap Monitor
Display Totals (cont.)

Reset Part Total

Total Reset

If for some reason the data in the instrument is corrupted or the display
shows 'PrOg' then the instrument must be totally reset.
1. Switch power off.
2. Press and hold all 3 control switches.
3. Switch power on.
4. Release all switches.
All instrument settings should be returned to the factory-set values. If the
display shows 'PrOg' again, the instrument may be faulty and must be
returned to the manufacturer for inspection and repair.
6
4 bars display momentarily.
Grand total displays for a further 8 seconds, then
defaults to the normal display.
Press and hold with part total displayed.