Cycle Guide - Sears Kenmore Elite 796.3141 31 Serie Manual De Uso

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

CYCLE GUIDE
The cycle guide below shows the default settings, available options and recommended fabric types
_
-- Available Option
for each cycle. Allowable modifier adjustments are shown below the default setting for each cycle.
Default Setting
Normal
Whitest
Whites
Heavy
Duty
Sanitize
w/Oxi _
Bulky/
Bedding
Clean
Washer
Cotton, shirts, jeans,
socks, pants
Heavily to normally
soiled white cottons
Heavy soiled cotton
fabrics
Cotton, underwear,
pillow covers,
bed, sheets, baby
wear(less than 11
Ibs).
Large items such
as blankets and
comforters
Hot
Extra High
Eco Warm
Medium
Heavy
Cold
Low
Light
Tap Cold
No Spin
Extra High
Warm
High
Normal
Eco Warm
Low
Light
No Spin
Hot
Extra High
Eco Warm
Medium
Normal
Cold
Low
Light
Tap Cold
No Spin
Extra High
Medium
Normal
Low
Light
No Spin
Hot
Extra High
Eco Warm
Medium
Heavy
Cold
Low
Light
Tap Cold
No Spin
0
0
0
0
_CERTIFIED
BY NSF: NSF International (formerly
the National
Sanitation
o
_
Protocol P172
Foundation),
certifies that the Sanitize w/Oxi
cycle reduces 99.9 _ of bacteria
SanitJzation
Performance
ofResidential
and
on laundry, and none of the bacteria will carry over onto the next laundry
load
_
Commercial,
Family
Sized Clothes Washers
when used in conjunction
with Oxi products.
Follow the product manufacturer's
instructions for using Oxi products with this cycle. Never load powdered
products
into the liquid bleach dispenser. Doing so can result in the product not being dispensed or being dispensed incorrectly.
Powders can clog the bleach dispenser, resulting in leaks or damage
to the washer or your clothing.
NOTE:
To protect
your garments, not every wash temperature,
spin speed, soil level, or option is available
with every cycle.
A chime will sound and the LED will not light if the selection is not allowed.
_When a cycle is selected, the default time for that cycle is displayed.
This time will change as modifiers
or options
are selected. Once the START/PAUSE button is pressed, the washer will measure the size of the load. The estimated
time may change once the load size has been measured. The washer automatically
adjusts the wash time for the
amount of laundry, water pressure, water and other operating
conditions.
These cycles use various wash motions to enhance cleaning and/or
fabric care performance.
The wash motions may
sound difi:erent at difi:erent stages of the wash cycle. This is normal.
14

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido