Famco hAP lite Guia De Inicio Rapido página 2

Mounting
The device is designed to be used indoors and placed on a flat surface with all needed cables connecting to the
front of the unit.
Alternatively unit can be mounted on the wall, mounting points are located on the bottom side of the device, screws
are not included in the package. Screws with size 4x25 mm fit nicely, depending on your wall structure you can use
dowels 6x30 mm and 6 mm drill bit if needed.
When mounting on the wall, please ensure that cable feed is pointing downwards.
The IP rating scale of this device is IPX0. We recommend using Cat6 shielded cables.
Warning! This equipment should be installed and operated with a minimum distance of 20 cm between the
device and your body. Operation of this equipment in the residential environment could cause radio
interference.
Expansion slots and ports
Four 10/100 Ethernet ports, supporting automatic cross/straight cable correction (Auto MDI/X). Either
•
straight or crossover cable can be used for connecting to other network devices.
Integrated wireless module 2.4 GHz, 802.11b/g/n, antenna gain 1.5 dBi.
•
Reset button
RouterBOOT reset button has the following functions. Press the button and apply the power, then:
Release the button when green LED starts flashing, to reset RouterOS configuration to defaults.
•
Release the button when the LED turns solid green to clear all configuration and defaults.
•
Release the button after LED is no longer lit (~20 seconds) to cause a device to look for Netinstall servers
•
(required for reinstalling RouterOS over the network).
Regardless of the above option used, the system will load the backup RouterBOOT loader if the button is pressed
before power is applied to the device. Useful for RouterBOOT debugging and recovery.
Accessories
Package includes the following accessories that come with the device:
EU Switching Power Supply 5 V, 1 A, 5 W, Level VI, cable:1.5 m, MicroUSB.
•
Specifications
For more information about this product, specifications, pictures, downloads and test results please visit our web
page: https://mikrotik.com/product/RB941-2nD
Operating system support
The device supports RouterOS software version 6. The specific factory installed version number is indicated in the
RouterOS menu /system resource. Other operating systems have not been tested.
See mikrotik.com/products for the latest version of this document. Page 2, Document #52292 Modified on: 26.SEP.2019