2.2. Product usage
Installation warnings
• Do not operate the appliance before it is fully installed.
• The appliance must be installed by an authorized technician and
put into use. The manufacturer is not responsible for any damage
that might be caused by defective placement and installation by
unauthorized people.
• When you unpack the appliance, please make sure that it was not
damaged during transportation. In case of any defect; do not use
the appliance and contact a qualified service agent immediately. As
the materials used for packaging (nylon, staplers, Styrofoam...etc.)
may cause harmful effects to children, they should be collected and
removed immediately.
• Protect your appliance from the elements. Do not expose it to
weather conditions such as sun, rain, snow, etc.
• The surrounding materials of the appliance (cabinet) must be able
to withstand a temperature of at least 100 °c.
During usage
• When you first run your oven, a certain smell will emanate from
the insulation materials and the heater elements. for this reason,
before using your oven, run it empty at maximum temperature for
45 minutes. At the same time, you need to properly ventilate the
room in which the product is installed.
• During usage, the outer and inner surfaces of the oven get hot.
While opening the oven door, step back to avoid the hot steam
coming out of the oven. There may be a risk of burns.
• Do not put flammable or combustible materials, in or near the
appliance when it is operating.
• Always use oven gloves to remove and replace food in the oven.
• Do not leave the cooker while cooking with solid or liquid fat. They
may catch fire on condition of extreme heating. Never pour water
on to flames that are caused by fat or oil. Cover the saucepan or fry
pan with its cover to choke the flame that has occurred in this case
and turn the cooker off.
• If you will not use the appliance for a long time, switch it off and
unplug from the socket. also, when you do not use the appliance,
keep the gas valve off.
• Make sure the appliance control knobs are always in the "0" (stop)
position when it is not used.
• The trays tilt when pulled out. Be careful not to let hot liquid spill
over.
Forno-KBIO3954-Kunft-Manual-5.indd 11
built-in oven
KBIO3954
11
EN
18/05/16 16:31